oil plug

there are, so far, 6 oil passage threaded hex plugs in the block and head, the 2 in the head are a bit smaller, 1 in the front and 1 in the back, and the block has 2 at the back left, next to the crank and 2 on the front in between the oil pump and crank sprocket, my question is since i am...

1989 ford ranger, 2.9v6 manual STX I could really use some help locating where this Galley plug is supposed to go there is 3 in total, two are already installed on the back of the block just next to the freeze plug. (if you look to the front of the block, left, you see a galley plug is...

1989 ford ranger, 2.9v6 manual STX I could really use some help locating where this Galley plug is supposed to go there is 3 in total, two are already installed on the back of the block just next to the freeze plug. (if you look to the front of the block, left, you see a galley plug is...

I have a problem with the old 2.9l v6 i just rebuilt for my 1989 ford ranger. after rebuild the oil pressure shoots down pretty much the same time the coolant temp starts to rise. i also noticed a slight smell of gas coming from the coolant? so far no leaks, no mix in coolant/oil. runs great...