• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

manual


  1. gearstick rattles like crazy

    its just started to happen, its very annoying riding 60 down the road and all i can hear is that darn stick rattling. any ideas? oh and another thing thats happening is the truck wants to buck like crazy when i change from 1st to second, to third. it stops bucking after third
  2. Tranny issues, possibly slave cylinder?

    i have a 94 mazda b3000 with what i am pretty sure is a M50D-R1 4WD Transmission, a month ago my brother was driving it home, and he heard a noise, but couldnt describe it, shortly after it wouldnt move at all, and had to be pushed to a gas station, so heres the situation, i can start the...
  3. Trouble shifting into Second Gear

    New here, and i've seen some info on this, but i just wanted to get some specifics. I have a 2002 Ford Ranger Edge 4x4 Manual Extended Cab. I just bought it about a month ago. It's very difficult to put into second gear, and sometimes a bit difficult for other gears. Fluid level checked well...
  4. 84bluebronco2

    Swaping Mazda TK4 for FM145

    Are the two transmissions the same size? I know the bellhousing is removable from my truck to transplant onto the FM145. Will the drive shafts be compatible? My truck is a stock 84 b2 with the TK4 4spd manual. Looking to swap in a FM145. Thanks, 84BB2
  5. '94 Ranger Stuck Gear

    I have a manual '94 Ranger 2.3 liter 2x4 that was given to me by a guy at church. The transmission was low on gear oil, and the gears were beginning to whine. I knew that I needed to top up on the lube, but I didn't. Shame on me. The transmission got really hot one day, and the clutch...
  6. AVM hub swap, will not keep axles locked in 4x4

    I have a 2000 Ranger w/ the PVH 4x4 system, the truck was made before 06/2000 so it does not have the live axle set up. It also has 4 wheel abs, fyi. In December I changed both hub bearing assemblies, left and right sides. While I was changing the hub bearing assemblies I noticed the steel...


Top