manual hubs

I have an 88 ranger that has manual locking hubs and have been having some issues. The passenger side hubs want to switch to locked every so often. They are the stock hubs. I unscrewed the cap and found that the screw through the middle can bo longer hold the cap on. After I unscrewed this I...

Hi everybody, I'm halfway through converting my 2002 B3000 Dual Sport (Edge) to 4x4, and it's time to decide on a hub setup. I was originally planning on using the '98-2000 CV axles and buying the Rugged Ridge manual hubs for them, but am also drawn to the simplicity and (relative) strength of...

Survey; are all Dana 35 front 4x4 manual hub nuts the same? (seems they would be) for all size trucks that have D-35. when torque to 150+ the inner nut wants to spin, the retainer ring wants to ride up on the spindle. (the warn ring stretched, the Highway ring threaded) I fashioned a spanner...

Hi, Looking for some help. I want to replace the vacuum hubs with the manual hubs and Rugged Ridge / AVM are the only product I've heard of that purports to fit my Ranger. However I'm having a hard time confirming "spline" count. My mechanic says my old system has a 42 spline count so I need a...

okay, so i bought some Warn manual locking hubs for my 99 b4000 due to the pulse vacum hubs stopped working. after buying the new hubs i look at the diameter they are 3.5inches and the the hubs i have currently(stock) are 3inches and so is the inside diameter of my stock rims. is my only fix to...

Hey Guys & Gals, My 97 ranger 4wd w/ manual locking hubs...front rotors are beyond WARPED! I am under the impression that to replace the rotors you have to take the whole hub apart because of the Manual locking hubs? If thats the case how hard is it to do?

so i went to the river by my house to go fishing and i engaged my manual hubs at the gas station down the road. i got in and started to drive off, i had no turning it just jerked the wheel back and forth when i tried turning. so i got out dis engaged the hubs and didn't go fishing :bawling...

Hello, When I shift into 4x4 High the little "4x4" light on the dash board will not come on. This happens when I shift into 4x4 Low also, but the "Low Range" light comes on. I've checked the fuses and none of them are bad. I'm pretty sure my 4 wheel drive isn't broken because when I shift into...