lowering

I’ve been looking for a 7/8 lowering kit or something that would work. I looked at the 5/6 lowering kit and it’s not low enough for me. Anybody have anything lower that could give me some advice?

Anyone ever swap in an explorer axle and retain the spring under? Did it work out? I'm wanting to flip my ranger to lower it and if I can upgrade at the same time might as well, right?

I have two (94&96), splash , and want to lower both a few inches, but do not want to lose a decent ride. Before spending money on parts, with a possible disappointment, would like some feedback from those who have done this satisfactorily. Thank you.

I've got a 1990 Ford Bronco 2 4x4, and I'd like to lower it. As far as I know, no one has done this, so when I google ways to do it, I only get ways to lift it. I was thinking about using lowering springs, but I don't know enough about them to do that. Also, since I'm on a budget, bags aren't an...

ok, so I dropped a 351w into my 2wd 89 ranger. I want to lower it to give me a better handling truck. my question is do the drop i beams raise the steering components up more into the engine bay. Im concerned bc if they do it will hit my oil pan. it barely clears now at full stuff. I just dont...

I got my boxes in mail today with no u bolts or shackles like I read the install paper and said came with shackles and well idk im looking to get bed bolts from ford what else do I need? like the clips for bed bolts? ubolts? shackle bolts? control arm bolts? kinda disappointed at the moment...

Hey everyone new to this site. I have a 97 single cab short bed that I'm gonna lower. Quick question. In the rear when doing an axle flip can I use a spring perch rather than buying that C bracket flip kit? Sorry if it's a dumb question but why buy parts when I have them sitting in the garage

Hey gang, So I have a Mazda b2300, I really love it but I bought it lowered and I have been driving it that way for about a year. I would like to use my truck for... Truck like uses, towing, light off-road, bug outs, camping etc... Problem is I have 0 stock parts to swap back on. I looked...

I would like to lower my truck just a little bit in the front and rear, i can easily do the fronts but is there another way i can lower the rear without relocating the axle to above the rear leafs?

I have a 1994 Ranger XL 2WD. I am not sure on how I want to do it yet so i thought I would hear what you guys have to say. I was thinking about just flipping the axle and cutting the front springs but its kinda iffy. I'll take any input. Thanks.

i have found the djm kits for it but they are going for like 700.00 off their website...does anyone know any good places to look or any suggestions on maybe a cheaper way without completely losing the quality?

i have found the djm kits for it but they are going for like 700.00 off their website...does anyone know any good places to look or any suggestions on maybe a cheaper way without completely losing the quality?