I need to change lifters on my 96 ranger 4.0 but all I see are sold individually for 50$? There’s gotta be something else that’s better priced, especially for it being older. Any links to where I can get any would be appreciated
i’m going to remove the cylinder heads here soon to replace the lifters, what else should i replace while i’m in there? here’s what i already got in the shopping cart, pushrods, lifters, all gaskets that will be removed in the process and new head bolts. should i do rockers as well? along with...
how do i install brand new valve lifters on a 2.9 v6 without tearing the whole thing apart. she’s ticking like all hell. i saw a video where a guy removed the valve cover, then rocker arms, then pushrods and used a grabber type tool to pull the lifters out? is this possible on the 2.9 or could...
This form has helped me in the past and I would appreciate any help with this issue.
I recently spent 2k on changing my timing chain, timing chain cover, water pump, fan, and fan clutch.
The next day I noticed a faint ticking noise coming form the bottom end of the motor. It is hard to hear...
In short. Trans blew up,converted to 5sp. Engine was leaky everywhere and tick6. Tore the top n bottom end apart. Got the gaskets, new oil pump/screen. Was just going to replace rocker arm/pushrod on the top but four or five lifter caps(little platic cup) were broke and dangling around the...
94 4.0 150k miles manual trans
no compression #5, other cyls. good(150 reading) seems to be burnt exh. valve... is it possible that a pushrod or lifter or both are the real culprit? like to ask before i order new heads. also, will a new top end blow out my rings as has been suggested by a shade...
I have an 88 ranger and it was sitting for about a month due to transmission problems and when I first started it up it began to make a ticking noise from the top of the motor. I think it might be the lifters should I be concerned? Is it bad for the motor?
ok well i just bought an 86 ranger for $550.00. it runs but not very well. I did a compression check (engine wasnt warmed up)
#1 150 psi
#2 0 psi
#3 130 psi
#4 130 psi
#5 130 psi
#6 125 psi
i added some oil to number 2 and retested multiple times. no change. also my battery was starting to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.