• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.


  1. AC/Heating Issue

    Hello all, Just joined so don't know if this is the right place, but I'm having a bit of an issue with my 2020 Ford Ranger. I just bought it for 31k 4 months ago, but I'm having an issue already. Sometimes when using the heat, I could turn it to cool air in the AC but it wouldn't blow cold...
  2. Blend Door swap non hack way?

    Hi i got a 97 stx 5 spd and the broken blend door that everyone gets is getting fixed finally. I was wondering if anyone here can help with the last part of the fix. Im trying to replace the door without cutting a hole in the box like all the videos on youtube show and even with the doorman...
  3. Heater Is Not Working Properly

    Hey, so I have a 1997 xlt with the 2.3l. I keep having troubles with the heater in it. Last winter it was working like a champ, but now it doesn't seem to want to work right. I have fixed the blend door, backflushed my heater core, checked the vacuum hoses, and replaced the heater control valve...
  4. No Heat

    87' Ranger- v6 Temp goes up but I don't get any heat. Thermostat?
  5. Cab gets hot

    I have a 1990 ranger V6 2.9L. The cab gets particularly hot in the summer, and it feels as though heat is coming from the tranny housing under the gear shifters. I'm being told it could be my exhaust manifold, and to get it checked. My exhaust was done a year ago, and it always passes air...
  6. Lack of heat

    I have a 97 Ranger with a 4.0 L engine and I am having a problem getting heat in the cab. Temp. gauge shows engine is heating up. I have replaced the thermostat, that's fine. Both fluid lines into the firewall/heater core heat up, although one does seem warmer than the other. The Heat Control...
  7. trany fluid leak when hot

    my truck a 93 ford ranger when it get hot will start leaking trany fluid, just after i got it i went on a trip and when i was pulling hills i would start leaking, on my way back it just dumped my trany fluid, took it to a shop and had a new seal put in it, the mechanic said that it was not the...
  8. stevealvey24

    Air conditioning redo lol

    I have a 1986 Ranger 4x4 with a 2.9L. I want to put air back on the vehicle and all I have is the compressor. It had factory air. I need to know what ALL I am going to have to get to make the air work again. And possibly wherre to get it at? Any help is greatly appreciated. Thanks guys.

Sponsored Ad

Sponsored Ad