• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

ground

  1. Ground in GEM Module??

    Hi Guys, new to the forum so I appreciate any help I can get. My battery would die if I didn't drive the truck for 4-5 days, so I decided to check to see if there was any current draw while the truck was not running. I found about 0.23 amps drawing all the time, so I started pulling fuses...
  2. 1999 Ranger 2.5L rear light electrical problems

    Hello! I have a 99 Ranger with lighting problems in both taillight assemblies. This truck has three connectors in each taillight assembly: one for a single filament turn signal (two pins), one for a dual filament brake/park light (three pins), and one for a single filament backup light (two...
  3. Fuel Relay Buzzing/Vibrating badly, why?

    In my 1992 3.0 the Fuel Relay is going nuts, even after I replaced it. I tightened the ground strap bolt coming off of the negative terminal and cleaned the post and the clamp because I heard this was a ground issue. Any other ideas? The engine also seems to be stumbling when started though it...
  4. electrical gremlin

    I recently decided to rewire my speakers because no set of speakers i put in the ranger were working properly. The original setup was custom and had all left side speakers wired together and all right side speakers together. I split them up and now i have no radio and no windshield wipers. It is...

Sponsored Ad


Sponsored Ad

Top