fuel

i have found weird things on this question looking for a straight answer.

So, 1994 Ford ranger Splash 4.0 4wd auto Got it pretty good price, kid loved it, big tires, lots of cosmetic stuff. Kids had it before us took out all the interior plastics pretty much including dome light, headliner, a pillar trim, visors, etc., put all kinds of crazy lights under it, in the...

My truck has a brand new in tank sending unit but my fuel guage doesn’t really work…some times I’ll start it up and BOOM it jumps right up but after about 3 minutes it has slowly made its way back down to empty. Not times it just downst move. I’ve checked connections and fuses but I am coming up...

I'm an owner of a '11 Ranger 2.3L 4cyl automatic, and possibly about to purchase a' 94 manual. 99.99% positive after replacing the shift solenoids in my '11 that the issue does indeed lie in the tranny and I'm getting ready to take it out of commission to tackle an increasingly daunting to-do...

anyone here running ethanol? having issues with cold starts, and recently alternator went out, gonna replace with higher amp alt, but just wondering if anyone else on here ran into a similar issue when switching to e85 and how u went about troubleshooting. 2000 3.0 ranger, 5spd. ty

Ok all have been looking at the forum now for a while and mileages seen all over. Ranges look like 11 to 12 towing to 17 to 18 around town. Well I just got excited the other day after my last fill-up checked the mileage numbers to compare with the truck computer which has all ways been within 1...

Hi all, I just inherited a 2002 Ranger step side with the 4.0 SOHC, about 179k miles, well taken care of. The previous owner was having an intermittent issue that he was trying to fix, but ultimately decided to give up and get a new vehicle, so he ended up giving it to me for free. I am trying...

I’m going from a carb’d 2.8 to the 4.0 OHV out of a 94 Ranger. I know that I should swap gas tanks for one with a fuel pump, but I’m wondering if I can just go with an in-line pump and keep my original tank. Found one on jegs 43psi so that’s right in the ballpark, but do I have to get a pressure...

Hello! I'm new and looking for help getting the fuel rails off my ranger. I got the intake manifold off (see pictures). There are 4 complex hollow pipe like screews(see picture) next to the 8mm bolts for the fuel rails. I can't remove the pipe screws. I have loosened 3 of themcompltely and they...

hey guys, I've been trying to fix a bad fuel sending unit on my 1984 2.0L 2wd. Got a 1986 in-tank pump assembly and I believe a 1983 and they are both different from my old one and both don't fit. I read somewhere that even if I could get it to fit physically the sending unit runs on a different...

Hi all, My 2.3 suddenly lost power (didn't quit) here a few days ago. Dist was worn inside on contacts, replaced. New plugs and wires as well. Confirmed spark on all 4 cylinders. Checked pulse on injectors 1, 2 and 3, electrical good there. New low and high pressure pumps, confirmed they work...

have a 2006 Ranger STX with the 3.0 Vulcan 6 banger in it and have a issue that is boggling me to death... Fuel pump assembly changed, Fuel pump sock changed, Fuel filter changed, All hoses and related connections checked no leaks, No fuel smell nor leaks found, Fuel pump relay changed...

Good evening, TRS. Haven't posted much here, so I apologize if I do anything wrong. What I've got: 1994 Ford Ranger 2.3L 5spd What the problem is: Fuel injectors are not firing. What I know: I have 12 volts at the hot wire(s), but the ground pulse isn't coming through. If I ground them manually...

Hey guys I've been searching but can't really find anything short of welding. It's an 86 2.9 ranger with a 5.0 efi SD out of an 87 Lincoln Town car. My problem is the fuel lines. Anyone know the best/cheapest way to adapt them? Thanks yall.

I have a 94 Ranger 5 speed manual 4x4 4.0 OHV. I have replaced the following parts.. Fuel Pump and Relay checked ground and power wires to pump. Fuel Filter. O2 sensors "all" plugs and wires. cleaned mas air flow sensor replaced tps and cleaned the Iac... This son of a gun runs perfect when you...

So I just bought and '87 ranger with the 2.9 in it. I couldn't get it to start and have narrowed it down to being a fuel issue. I pulled the tank figuring I was just replacing the fuel pump since I couldn't hear it running. However, the tank is pretty rusted so I'm now planning on replacing it...

Hello everyone. I'm having problems with my 97 ranger running rich. It has the 4.0 ohc engine with a 5 speed rwd. It's throwing the following codes: p1132, p1152, p0135, p0141, and p0155. They indicate heater circuit malfunction on all three o2 sensors and that both banks are running rich...

Ok...so, I have troubleshooted so much the past few weeks regarding a P171 & P174 code. I am wanting to make sure I have covered all bases before I pull the intake. Here is a brief rundown: 1999 4.0 V6 OHV 4x4 1) Valve Cover Gaskets (and ECT sensor) replaced a few months ago 2) Not sure if...

Hey guys i have a '94 ford ranger 2.3L 5speed Manual, the fuel gauge goes back and forth randomly, which tells me everything in the cluster is fine as Far as wiring? If so that leaves me a few possibilities; -Bad ground in fuel pump or sending unit? I just bought this truck and thats pretty...

I have been getting a "too lean" MIL code on both banks and while I preemptively replaced the O2 sensors, that did not fix the issue. So, I dug into the problem and have eliminated a vacuum leak (checked with a pressure gauge ... stayed in green under all conditions except fast / high rev of...