front

I did a search. Didn't find quite what I was looking for. If someone knows where the info is on here, please feel free to share it. I may not have hit the search string that would find it. I have a 2000 Ranger XLT EXT 2WD 3.0L FLEX, towing package. I have added a 4" spindle lift to the front...

So pretty happy with my rear set up. Explorer 8.8, ex leafs, flip kit, djm longer shackles, factory ex trac bars, stock ex sway bar. Sits just how I want it. The front needs to be stiffened up a bit and lowered an inch for a couple different reasons. Would adjustable shocks be the best way to go...

I have a 1998 ranger with a 2" torsion crank in the front and 2" shackle spacers in the rear. I have 31" tires on rims with negative backspacing. What kind of gas shocks would anybody recommend for the front suspension. It seems nobody has any shocks listed for a lifted ranger.

is there anyway to tell if i have lockers in the front without taking it apart? when i have the hubs locked and in 4wheel and turning the front end jumps like crazy, its almost anoying. Is this something thats normal or is my front end locked or maybe something broke? Sorry if there is a place...

i'd like to put a reciever on the front of my 98, i know i'll have to at least fabricate some of it to make it line up with some holes. would this be safe? i wouldnt be doint too much extreme stuff with it, just would be nice to have a front hitch...

Hi, I am new to the site and I was wondering if the front bumper from an 06 Ranger would fit a 2002? I know with F150's 04-05s have a different mounting set-up than 06-08s and are not compatable, but they are all still the same generation/body-style. Thanks for any help, quick replies would be...

Ok, so I was working on my Ranger in Auto Class. simple enough, right? Wrong. My teacher and I agreed that this is the first time the front has probably had maintenance done on it since 1986; with that being said, it's pretty ugly. We were taking out the Spindle and replacing the Bearings...

I have an 89 Ranger and manual warn hubs, the hubs are good, and i JUST replaced the driverside U joint, STILL having a loud knocking noise, i've had a friend check and it's actually the ears of the U hitting the end of the bolt holding the bottom of the knuckle (hub?), u can see it just below...