• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

exhaust


  1. ClodSlayer

    Paint exhaust manifold?

    I have to do a head gasket job on my 4-banger, and while I was pulling it apart I realized that the exhaust manifold is kinda rusty... Not rusty to the point where it needs replacing, but rusty enough to look bad. I was wondering what the best way to paint it is, if there is one. And if there...
  2. bblatch69

    gibson, magnaflow, or ?

    I was looking into cat back set ups for my b4000 with the 4.0 sohc, just wondering if anyone could give me some input on what brand would be the best? i want something that sounds good and deep outside, but quiet in the cab. thanks! :icon_thumby:
  3. bourcier700

    Help With Duel Exhaust Measurements

    Hey Im looking to put a cheap duel exhaust on my 93 Ranger reg cab with 114 wheelbase. I was thinking Y pipe out of the muffler then duels from there. Wondering if anybody has done this and if they know the measurements for all the bends (I know I could go measure it myself but want to see what...
  4. Dirmaid

    MBRP Catback w/ turndown

    I bought the mbrp catback for my 4.0 sohc. Pros: not extremely loud, but the truck means business now ease of install was rediculously simple. they provide everything you need plus a sticker looks very nice if you get the stainless steel Doesnt drone in the cab Not ricey for a V6 cons: may...
  5. header issues

    hi im getting toward the end of my swap and im having major issues finding headers that work i got a set of headmans that were supposed to be for this swap but they didnt clear the steering shaft or the passenger side frame rail then i tried a set of explorer manifolds which cleared everything...
  6. 302 header problem

    hi im getting toward the end of my swap and im having major issues finding headers that work i got a set of headmans that were supposed to be for this swap but they didnt clear the steering shaft or the passenger side frame rail then i tried a set of explorer manifolds which cleared everything...
  7. 1994 Ford Ranger exhaust leak.

    I have a 1994 Ford Ranger with a 2.3l and i have been hearing a ticking noise while accelerating and have came to find its an exhaust leak right where the exhaust manifold comes down and joins with the pipe attached to the cat...
  8. muffler removal...?

    hi, i was considering removing my muffler and replacing it with piping of the same length and a turndown under the bed, in hopes of getting better sound. would this this kill my gas mileage? will this new exhaust set-up (less bends) make my truck run different because of less back pressure...
  9. Ranger Exhaust???

    :headbang: I wanttoput an exhaustonmy 1995 ford ranger. 4.0 5spd. Idk whats cheap and what will soundgood for a v6. Any suggestions.Thanks
  10. 06 ranger ugrades

    i got a 06 ranger sport, 3.0 v6 (i know..3.0 lol) but i love my truck eaither way. but im lookin for some upgrades that wont clean out my small wallet. like lifts, exhaust, and other things to make my lil truck somethin to turn ur head at. any tips appreciated cheers
  11. n00b needs help; Computer reset?

    Hi all - Got a code: "P0171 system too lean bank one" so, took truck to the Auto Skills Shop on post, (where we military types can do our own work and get access to shop tech and tools) The dudes there looked up codes and confirmed what I thought which was Oxygen sensor. Replaced Oxy sensor...
  12. 1996 B2300 Exhaust

    Hey guys, I have a 1996 b2300 and the muffler needs to be replaced. I was wondering if there is any cheap cat back systems out there for my truck? Also, how much do places usually charge to make a custom one?
  13. RangerFabWorks

    Show your v8 exhaust setup

    Nobody really seems to show how they did there v8 exhaust or how it sounds. Post up pics of what ya got
  14. Ranger Project Help

    Hello all, First off this is going to end up being a long drawn out process of stuff I don't know how to do for my ranger conversion. This initial plan is to drop a 351 W in my 91 Ford Ranger XLT, lift it around 9 inches, put a cowl induction hood on, 3.25" fender flares and repaint (someone...


Top