dash

Hello everyone, This is my first post here. I have a 1993 Ford Ranger XLT 3.0 2wd. i'm not sure where to begin with my issue and i could use some assistance. I recently got a new head unit installed by a buddy and since then i've had no dash lights and no running lights but the dash lights work...

does not need any vents, just the main piece itself in decent shape

Does anybody know what the material on a 1999 xlt ranger dash board is? If I can remember correctly the top is kinda soft? Is it vinyl or just normal plastic?

I figured I'd ask here before I start pulling the dash apart. The fresh air / recycle switch on my dash is stuck in the middle. I can push it all the way right and left but it bounces right back. This has the side effect of the air not being as cold or blowing as hard as it used to. This is a...

Swapping in a 4.0 to my 91 2.3 ranger. My question is if the dash harness connector (big white connector) is the same on all engines for my year or if the 2.9 and 4.0 differ from my 2.3 on the dash side. I can find that the 2.9 and 4.0 interchange but not solid info on the 2.3. I assume it does...

I've searched a little, and can't find anything. Has anybody done a 5.0l v8 swap using a 96 Explorer engine harness, but retain the 94 Ranger dash? I'm kind of stuck on my swap, because this 96 Explorer dash and body harness isn't going into my 4.0l 94 Ranger like I thought it would.

I'm looking for information on changing the color of my dash cluster from green to red. I have heard of people using new faceplates but I would like to avoid that if I can. Over on the Exploder forums, however, I did see someone talking about scraping off the factory green tint screen and...

Where can I order replscement dash pieces "perferably custom painted"?

Just picked up a Bronco II (2.9 5 speed, 2wd) which I had to do a lot of reassembly. Unfortunately, the overlay for the dummy lights is missing. Could someone please identify these for me so I don't ignore the oil pressure light thinking its the seatbelt light! There are 8 divided sections on...

Since my BII is down and it is too cold to work on it outside, i decided to yank the electrical system out of it & create wiring diagrams for all the harnesses and during this process fix the wiring issues im experiencing. The first one i have completed is the Main Cab Harness (including the...

Hello, I am asking this question because i have found cheap b2 being parted. I own an 86, iam wondering if the dash and windshield will fit. Aswell as the throttle and choke levers will be compatible with the current carburetor. Iam new to b2 2.8 so please give some advice.

On my 94 Explorer XLT, the red brake light would intermittently stay on when I released the parking brake. I noticed it generally only happened on rainy days. I've checked the fluid in the master cylinder, and the sensor for my parking break seems to be functional (the brake light dims slightly...

I just pulled the wires from the doors of a ranger with power windows and everything to put into mine and I have the connector under my kick panel but mine is dead basic so it only has 4 of 18 wires in it and for me it would be easier just to swap out the harness from my truck for the one with...