• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

control


  1. Heater Is Not Working Properly

    Hey, so I have a 1997 xlt with the 2.3l. I keep having troubles with the heater in it. Last winter it was working like a champ, but now it doesn't seem to want to work right. I have fixed the blend door, backflushed my heater core, checked the vacuum hoses, and replaced the heater control valve...
  2. Heater Control Valve Vacuum Leak

    Hey guys, I have a 1997 ranger xlt with the 2.3. I found out today that I have a vacuum leak that is keeping my heater control valve from opening up, so no coolant gets to the heater core. I can't seem to find the right vacuum diagram to figure out where the vacuum hoses go either. I believe it...
  3. 87 control module

    i have the good ol' push button for 4x4, but i cant remember entirely if its powered by the ECU or the button itself (gets power from the ecu but it operates itself) believe it does. think i found the someone talking about it on here a while ago but i cant seem to find the thread again. im...
  4. Pulling my control arm bracket mount off

    I've been running this truck rough for a while now. I've jumped it a lot and I bent the upper arm control arm brackets on both sides. now I've got limit straps to help stop that but i need an alignment BADLY but because of the bent brackets it can't be aligned. I'm going to get gussets from...
  5. Whats Wrong with my engine, trouble code p4133

    I have a 1996 ford ranger v6 4l. A few months back my check engine light came on, so I read the code and it came back as (p1443 evap emission contol valve). I also have a loud vacumm noise coming from the engine bay when im idleing, as well as poor gas mileage (~10mpg city). Anyone know what the...
  6. PRanger

    Throttle Body problem

    Was trying to clean my throttle body and IAC this morning.. Got the IAC clean but I can't get the hose that is connecting to the throttle body to even budge. Is there a technique to getting it off without destroying the rubber? here is a pic so I can clarify what im talkin bout thanks for...
  7. idriveafordranger94

    Okay guys, I'm officially stumped

    This absolutely confuses the hell out of me. I am completely stumped by this. So here's the story: The '94 blue Ranger I just bought quit running, so I decided to see what was wrong. Meanwhile, I had my brother's red '94 Ranger in my garage for a new clutch. I read some of the forums and...


Top