• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

clicking

  1. Just replaced belt tensioner and belt due to squeal. Now I can hear more noises. Help diagnose what else needs fixing?

    1999 Ranger XLT, no A/C pump. ~241K miles. I just finished replacing my belt tensioner and serpentine belt due to squeal. The squeal is eliminated, but now that it's gone I'm hearing other noises. Not sure if they were there before, and I just hadn't noticed them or if they're new. The squeal...
  2. thcscubajohn

    Dana 35 clicking

    Hi guys, I've got an issue with my front axle that j can't seem to pinpoint. Whenever I drive I get a clicking noise that has gotten progressively worse and more frequent over the past year. It used to do it very infrequently, sometimes over bumps, now it makes the noise all of the time whenever...
  3. My truck won't start and it's making a clicking sound!

    After I got out of work this afternoon, I got in my truck and heard a rapid clicking noise coming from under the glovebox. I heard the clicking as soon as I got in the truck, before I put the key in. I tried to start her up and the engine would not start. We tried jumping her too and no luck...
  4. Unkown Clicking Sound?!

    1989 Bronco II with 1992 Explorer 4.0, Dana 35, (godawful) A4LD, Auto Hubs, and BW1350 Electrical T-Case. After replacing the front brakes, the vehicle began clicking, and was especially noticeable when coasting. The sound is difficult to pinpoint from the cabin, as we (my dad and I) can't...
  5. Heater Valve and Compressor Clicking Issue

    Hello All, Just looking for a little diagnostic help on my Ranger 2.3 1997. Here is the issue. I have replaced the Heater Control Valve two times. It is a Murray POS plastic made in China part. Leaks right out of the metal arm. I suppose there is something wrong with the o-ring there. Another...
  6. something clicking in tranny under load, accelerating/decelerating

    1999 ranger 4.0 @200,000 manual 4wd I recently checked and filled transmission, and front diff, and transfer case, then this clicking under load started, I rechecked the fluid levels, made sure nothing was overfilled, checked three sources as to type of fluid.. the little black rubber dust...
  7. clickin noise when clutch released,louder under load, all gears except forth,

    1999 ranger 4.0 @200,000 manual 4wd I recently checked and filled transmission, and front diff, and transfer case, then this clicking under load started, I rechecked the fluid levels, made sure nothing was overfilled, checked three sources as to type of fluid.. the little black rubber dust...

Sponsored Ad


Sponsored Ad

Top