• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

broco ii

  1. Spacesuitrudi

    2.9-3.0

    I have an 88 Bronco II with the 2.9 with a blown head(there is coolant in the oil and the year is notorious so I'm just assuming) but I have a rebuilt 3.0 someone gifted to me. How difficult is the swap and is there anything different I have to watch for?
  2. No rpms

    Hi, I’ve got a 1988 bronco ii. Last year, on a hot day it stalled driving about 40 down the road. I replaced the tfi module. Then it started stalling and not starting for a few minutes. I checked the inertia switch. The connection was melted, so I figured I’d replace that. It drove fine the...
  3. A4ld sticking overdrive servo, and no governor valve?

    Hi guys, So I’m in the process of overhauling 1988 A4ldld 4x4. I’m replacing servos in overdrive, reverse and 2nd. I ordered the servos based off letters in caps and put them in. Here’s my problem 2nd with the bigger spring springs back to position when you push in. When I push in overdrive it...
  4. 88 Bronco II tranny problem

    First and foremost I would like to state that I am not sure all problems I am experiencing are related. Almost 2 years ago I had my A4DL rebuilt at a local shop. I picked up my car from the shop and it ran strong shifted well for about a week then started to buck on me and eventually seized. I...
  5. I need to get rid of 1988 Bronco II or parts

    I've been trying to get an ad posted but can't get it to work. I have a 1988 Bronco II that will go to the crusher pretty quick. It will run and drive a mile or so. It's all there except the back glass and everything works and is in pretty good shape as near as I can tell except the motor is...

Sponsored Ad


Sponsored Ad

Top