• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

98 ranger


  1. Cobra_CS

    98 ranger 2wd V8 swap, help needed

    Hey everyone. About to start my swap in a month and trying to get everything possible together before I start. Any help or advise would be appreciated. To start I'll let you know what I have, what I'm using for the swap and go from there. The truck: 1998 Ford Ranger ext cab flare side 2wd 4.0l...
  2. 98 4x4 module/GEM wiring

    Hello, I've posted about this before, but in a less specific way. I have a 98 xlt, 4x4 5spd. I can shift into 4 high fine. When switched to 4 low, no relay clicks, no flashing lights. I've taken the motor off and it will turn either way with 12v and the tc can be turned in 4 low. I imagine...
  3. 4x4 Low not working.

    4x4 Module Pin Out/Wiring Diagram Hello, this is my first post! I have read around this site and many others and still cannot find exactly what I need. 98 Ranger XLT-4.0-5spd My 4x4 high works fine. I can switch between 2wd and 4x4 high with no problems. It will not however switch into 4x4...
  4. William Spitzer

    98 ranger aftermarket tach help

    I got a sunpro tach for pretty cheap and i wanted to hook it up, I can get The light in the tach to turn on but I can't find the wire to splice into to make the tach actually work, I've read everything I can find but I can't figure it out, it's. 98 with the 3.0, 5 speed, Any suggestions would be...


Top