• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

33s

  1. 3slow98

    33s with stock gears

    Hi guys, I’m new to the forum and still trying to figure out how it all works. I have a question for y’all. I have a 1998 4x4 with a 3.0 v6 and a 5 speed. I’m currently running 31s on my stock wheels with cranked keys. I like how it sits but I’m wanting to go up to a 33 inch tire. Can I run 33s...
  2. Gear ratio help

    I have a 98 ranger, with a V6 4.0L. I recently upgraded to 33s from the stock 215s, and the acceleration / MPG is horrible. I mostly drive side streets, and was planning on upgrading to a 4.56 gear ratio from the 3.55 stock ratio. I was wandering how to do this, and what to buy. I do not want to...
  3. suspension questions

    I recently bought a 98 2wd ranger, and I was looking to put a lift kit on it. I was wandering what size lift I would need for 33s. I do not want to do a body lift, so only a suspension lift. Also, I was wandering what I would need to do other than the lift in order to fun 33s. It is a manual...
  4. Tucking 33's

    Hi guys, This is my first post, I just bought a 2007 Ranger Fx4 and am looking to tuck some 33's. I don't want to change the suspension at all for now. I was wondering if you can fit 33s in the rear without clearance issues, there looks to be a fair amount of room back there. For the front I am...
  5. 2000 Ranger 4.0L lift question

    Hey I just purchased a 2000 ranger completely stock. I want to lift it enough to fit 32's or 33's. If anyone can tell me how much lift I would need or link me a thread for it that would be wonderful. Thanks in advance.
  6. Rangerman92

    project : loser to cruiser

    Project orange crush This is my 1994 Ranger 4.0 V6 that has been under construction for about the past two months. It's been changed to look as close to a splash model as possible, minus the stepside bed. Everything is monochromatic. The body panels were all removed for painting and body work...
  7. 33's too small?

    Im driving a 2006 ranger XLT 2wd and im considering a 6 inch lift (3 inch spindles and 3 inch lift coils)(http://app.infopia.com/Shop/Control/Product/fp/vpid/7053527/vpcsid/10115844/SFV/32526) with 33's but recently i have started to think that 33's under the 6 inch would look too small should i...

Sponsored Ad


Sponsored Ad

Top