• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.


  1. 94 2.3 ranger has no spark

    My buddy and I rebuilt the motor and reconnected everything but one connector that we can't find were it goes both of us looked for it for hours. The truck has fuel but doesn't have spark. Does anyone know we're a connector that has a black wire with a pink stripe and also has a purple wire with...
  2. 2WD to 4WD

    Has anyone swapped an 89 B2 to 4WD from 2WD with the God awful A4LD and electric shift t-case? If so, how would you wire the electric shift into the transmission harness? Is it already on the wiring of a 2WD B2 or will I need to steal one from a donor truck?
  3. What should i do with my truck

    So i have a 1998 Ford ranger XLT rwd with the 3.0 v6 that im dropping in soon, it has 128,928 miles and I'm wondering if i should convert it to 4wd the cheapest way by buying a parts truck the same year as mine, And would i have to change the frame with it? I'd like to lift it but if it had a...
  4. 2wd overlanding?

    Hey there! New to the site. I've got a 95' 2wd xlt ranger with an auto trans and posi 8.8 with 3.55 gears. I've put 265/70r16s on it (about 31" tall) and I have a stock suspension. My question is what should I do to it to get it ready for some overlanding? If that's even possible with a 2wd...
  5. Southern California (IE)

    Hey TRS! Name is Ian, have a 2wd project (2001 2.5 lima 5spd) looking forward to being apart of TRS. Thanks
  6. Locking Diff

    Hey guys. I could really use some help because I'm knew to this. I have a 2005 Ford Ranger Edge 2WD, 3.0 V6, manual with an open diff. I'm pretty sure I have a ford 8.8" rear axle. I was wondering what I need to do in order to make it a locking diff? I am a college student so I don't have much...
  7. 1997 2WD Ranger XLT Front End Suspension Part Identifier

    Hello my name is Mike and through my research online I couldn't find the name of this part so please anybody who knows the part name/number please let me know asap.
  8. 97 5.0 swap

    Hello all! Just starting my 5.0 swap on my 97 2wd ext cab ranger. The old 3.0 blew a head gasket and water pump and not to mention the tranny is garbage hahah. So I got a 302 efi motor from a 93 f150 complete with engine harness and computer as well as a tranny which is an AOD or the newer...
  9. Dangerranger1998

    1998 lift kits

    I own a 2wd 1998 5speed and I'm looking for a lift kit can anyone help me out?
  10. Ranger Transmision Trouble Shifting

    i have a 1994 ranger 3.0 2wd with an automatic transmision. the truck was bought used and is claimed to have a new engine. The engine runs great but the transmision hasnt been taken care of and hasnt had new oil. Normally i would want to change the oil but im afraid if i do the transmision will...
  11. 100 Laps on Charlotte Motor Speedway

    Hi Folks! I'm new to the forum. I own a 93 Ranger 2WD, 3.0, 5-speed manual and we have had some great times together; the best being that I got to drive 100 Laps on CMS to help dry the track. Yeah, I pegged it at 85 mph once or twice. Anyway, I love my truck and want to give it to my son who...
  12. MrTachyon

    My 94 Ranger 2WD

    Hi, I'm new to this site. I will keep a running record of all the mods that I do to my ranger on this forum. Here is a picture of my truck the day that I got it. That was a little over a year ago.
  13. rough country lift? 88 2wd

    hey yall long story short finally have the time and some money to work on the ranger. i have a 88, 2.9, 2wd. back a while a ago when i was broke i jimmy rigged a lift and put some f150 coils and some shakles on in the back. it lifted it up a good 2 to 3 inches but the camber up front is all...
  14. suspension questions

    I recently bought a 98 2wd ranger, and I was looking to put a lift kit on it. I was wandering what size lift I would need for 33s. I do not want to do a body lift, so only a suspension lift. Also, I was wandering what I would need to do other than the lift in order to fun 33s. It is a manual...
  15. my 89 ranger build

    My 1989 ranger project Purchased the truck off a old disabled man in south Phoenix , az for 900$. It has around 84k original miles Clean title all that good stuff haha. Here's the truck how I bought it; As soon as it got home I started by taking the whole grill assembly and headlight trim...
  16. Help Need Double Lift Knowledge

    I have a suspension lift on my 2wd 01 ranger. 4 inch in front and 2 in back, spindle and shackle. I would like to know, if I were to do a 3 inch body lift so I can fit 33's or 35's, what should I need to prepare for as far as extending brake lines or steering column length and any other advice...
  17. Lifting 2wd

    Hey. I want to lift my 2004 Ranger 2wd. I'd like to lift 3in. I'm thinking coil spacers in the front and blocks in the back. If I put 3in blocks in the rear what's the best size coil spacer to put in the front to get the truck level at a 3in lift overall? Thanks.
  18. WonderTruck92

    Mixing ball joints from a 4wd on a 2wd

    I hope someone can help me. I have a 1992 Ranger 2WD 2.3L 4cyl and I believe it has a Dana 35 axle (pinch bolt). I am in the middle of replacing nearly everything on my front suspension (bushings, leveling springs, shocks, ball joints, tie rods, rotors, calipers, brake pads). I ordered new ball...
  19. WonderTruck92

    Mixing ball joints from 4wd on a 2wd

    I hope someone can help me. I have a 1992 Ranger 2WD 2.3L 4cyl and I believe it has a Dana 35 axle (pinch bolt). I am in the process of replacing nearly everything on my front suspension. I ordered new ball joints but I inadvertantly purchased the 4wd MOOG model numbers from Rock Auto instead...
  20. Dprocks100

    91' 2wd Ranger Build\prerunner

    So I picked up this truck back in February of this year (2013). Nice little reliable truck for a high school/start of college kid. Basic as crap, 2.3L manual, 1991 2wd ranger with 128,xxx. Used as a maintenance farm truck. No rust problems, besides the inside of the bed. Only problems I knew...