2.9l v6

Just bought a 86 Ranger 4wd for a father/son project. looking at going thru the 2.9l v6 to start then do the frame up restoration. body is solid beings it was a 1 owner from arkansas. curious what to look out for in the engine rebuild. any ideas? thanks

Ive been having problems with my 87 ranger 2.9 since i bought it. Fixed some issues but i cant seem to figure out a cold start issue im having and the fluxuating idle when the headlights are on at night. At cold start it will idle high for 2-3 seconds and then it will immediately die down to...

I have a 1989 Ford Bronco II 4X4 XLT it has the 2.9l EFI with the redesign heads. It has 150,000 miles 4-speed OD manual trans, manual hubs, manual transfer case. I have noticed that it is reluctant to start, but its more complex than that. I turn the key, wait for the fuel pump to stop...

I am hearing a very strange sound coming from the front under my truck. Heard it for the first time on the way home from work. It sounds like hollow steel balls clanging together. The noise is very inconsistent. Usually happens when slowing down, my foot is not on the brake. Here is a list of...

Hello Replaced alternator on 1988 ford ranger truck 2.9L what is the wiring order? I did not label wires for re installation 3 wires Green with red stripe white with black stripe yellow with white stipe

I just put an engine from an 89 ranger into an 87. there was no egr on the 89 so I also changed the computer. Now.. no spark. Checked and rechecked the timing. Suspect coil. Any other ideas?

Hi, first let me introduce myself... My name is David, and I am about to turn 16 (the legal driving age in Alberta.) I have inherited my grandpa's truck and have been driving it since I got my learner's permit two years ago. Aside from the truck being noisy and a little slow (which I am...