2.9

Hello... I have a 84 ranger which currently has the 2.9 carburated V-6. and the 5 speed manual transmission. I recently picked up a 302 (Throttle body injection) out of an 84 grand marquis , but it didn't come with a harness or computer so the plan is to convert back to 4 barrel carb, for the...

Hey guys, if you missed my introduction thread, my name is Anthony. I'm an electro-mechanical engineering student from Long Island and I have a 1989 bronco II with the 2.9 cologne and 87,000 miles. I've been lurking around the forum for a while now reading up on these engines and this platform...

I currently have no spark, although the spark seems to be intermitted. The truck fires when you first turn the key, but dies after a couple of seconds, then will not fire again for hours and has no spark. Occasionally, I am able to keep the truck going by working the throttle. When the engine...

I have an 89 ranger 2.9, automatic, push button 4x4, power windows, power locks. I need a full engine bay wiring harness that's not all hacked to pieces. and possibly a computer with those options as well...thanks... call or text, ryan, 734-717-9247. text is best. I have cash money.

Here's what I got. 89 ranger xlt ext cab 2.9 4x4 automatic Here's what's new...or rebuilt... Rebuilt engine. Less thank 500 miles Rebuilt trans & t-case New injectors New map sensor New 02 sensor New fuel pump New radiator Cat cut off Most sensors are new...I've done so much to it that I...

hello just showing off some items ive made for my truck its an 1989 ranger xlt v6 wih a 5 speed 2wd.1st is an exhaust tip i welded up from old parts from my f350 and a after market shift boot and gauges also have a cai,throttle body spacer,port and polished upper and lower intake.exhaust is 2...

I have a 1990 BII 2wd and am in the process of pulling the engine. I was wondering if any knows if I have to remove the tranny first or if there is room to remove both at once. Thanks

I have a 1991 Ranger 2.9 v6 5 speed manual 4x4. When i try to start the engine, the EEC fuse blows. The first time was 3 months ago, it happened while i was driving, i could not find any shorts in the wiring. I took it to my local auto repair shop, and they could not find anything wrong with it...

I have a 91 Ranger that has been sitting for about 2 years. I quit driving it bc I think I cracked the head. It has a 2.9 in it and it got hot and I couldn't keep anti-freeze in it. I parked it and i haven't drove it since. I miss it and I would like to drive it again but I don't know where...

to make this short..both my 2.9 head where cracked..sent them in and found one good passenger side one at junk yard..had a hard time finding another one that wasnt cracked..anyway the guy at the head shop said it didnt matter pass or driver side head they where the same and interchangable..is...

first start up runs fine but after driving for a few minutes and come to an idle it surges and the engine light will come on, but when i get up to highway speeds engine light goes off and no issues, i'm assuming its a vaccum leak but cant find one anywhere! anybody heard of this issue?

I have a 1986 ranger 2.9. When i crank the engine it might fire once or twice but not start. or if it does start it will not idle and will run extremely rough. There is also A LOT of greyish/white smoke from the exhaust if it starts but it is not from coolant. I have replaced fuel filter, spark...

I just bought a 92 ranger for a parts truck and the motor makes this wierd noise and won't go faster than 15 like it has no power. I pulled the dip stick and noticed it smelled like gas. I don't need the motor but would like to get it running cause the truck is much nicer than I thought it was...

Here's my problem. I've got a 90 ranger with a 2.9. For some reason after driving it a ways it will miss or just fall on its face and will do it more frequently the farther I drive it. It misses a little at idle too. My check engine codes are 22,23, and 67. Which are MAP out of self test range...

Hi, I have this awful squeeking sound when the clutch is out, and when it's in you can feel vibrations on the pedal, and makes this racket. So I figure it's the throwout bearing and I've known it needs a new clutch. So what I need to know is everything I need to do to change the clutch and what...

I just purchased a 1990 Ranger 4x4 with 2.9 liter V6. I have a coolant leak that is spraying on the engine side of the air conditioning compressor and wetting the hood directly above the ac compressor. Any thoughts on where the leak is most likely coming from. I can't seem to see the leak...

First off would like to start and say thanks for all the help with my previous thread a few months back. I got the problem worked out, turns out it was a "weak" fuel pump. Anyhow while driving today to get a part for A DIFFERENT vehicle, which is broken down, I hit a hug hole, open manhole...

I have a 1990 ford ranger with the 2.9 v6 engine.... Having fuel issues. KOEO fuel pressure starts at 10 psi and will NOT build pressure, if I cycle key on and off and back on it will raise barely 1 psi each time. As soon as I start the truck, several cranks, fuel pressure will drop back to...

My name is Camron, and I've been in contact with ColtCams. They say that they would be interested in making an aftermarket cam for the 2.9 I just wanted to get on and see how many people would actually be interested in this product. They say it will have higher lift and duration, and are 99...

Well I have found one on line at flatlanderracing.com but.... I have researched them and it is not looking like a place I would buy from. My question is: Is there another company out there that has a whole kit like them. I want to get a master rebuild kit. they only want $600.00 for the one they...