Search results

Thanks all for your replies. I don't remember seeing much crud on the output port, but I wiped it down with a clean rag. Do I need to clean it with something like carb cleaner? It looks all the way in to me, but it was hard for me to see as well. In retrospect, I probably should have used...

Hey all, I have a 2002 Ranger with the 3.0L engine. The lower radiator hose was leaking at the tee, and so I replaced it. I used a Gates hose and used worm clamps instead of the spring clamps. I tightened all of the worm clamps with a screwdriver. I'm now getting a leak where the hose connects...

Hey Guys, I have a 2002 Ranger Edge 3.0L gas with 121k miles. A few months ago, it would occasionally crank but not start after being driven for a while (maybe 5+ miles). After sitting for about a day, it would then start right up. Now, it'll crank but not start at all, even when cold. When it...

Hey Guys, I need to replace the lower radiator hose on my 2002 Ranger Edge 3.0, and was hoping to get some advice/input on the easiest way to remove and install the smaller branch of the lower radiator hose that goes to the front of the engine (to the water pump(?)), since that area is really...

Hey Guys, I seem to have a coolant leak coming from the connection of my lower radiator hose (engine side) on my 2002 Ranger Edge 3.0L. I'm looking to replace the factory spring-type clamp with a worm-type clamp, and was wondering if it would cause any problems or hose damage if I just leave...