Search results

Good Afternoon Gents, Im going to swap in a 5.0 with B&M174 roots blower in my 91 4x4 ranger. It will produce 475-500 ft lbs of tq. Was thinking ZF 5 speed (dont feel like paying $1,300 for trans controller if using an auto with overdrive). What transfer cases do you recommend? Pros and...

Hello Gents, Okay here is my situation. I have a 91 STX 4x4 with 4.0 OHV truck has sat a 1 1/2 yrs now. Parked it because lower intake was leaking. Building a nasty 347 swap. Okay well now i need this truck to be my daily for a few months. I tear her down only to find collapsed intake lifter...

Gents, im in a bit of a jam. I really could use some guidance. Okay I have a 91 Ranger ext cab STX I put a lot of lift on the truck. I ground down all the factory rivits and installed all the new brackets. Then reassembled everything. Now, I also extended the radius arms. not being a real "4...

Hey Gents, I have a 91 stx 4x4 with a 4.0 Here is the dea. Putting together all the pieces to do my .0 conversion. Well in the meanwhile my stock fuel pump is starting to show signs of dying. Before it goes I would like to just switch it out with a new unit. Since I was going to go with a v-8...

Hey whats up, I have a 91 ext cab with 6" kit and use 8" coils. I also have a 1" spacer. I am running 37 Goodyear mtr's. I also am running 5:13's With a 4.0 at 3,000 rpm I am doing right about 64 mph. So if you want pics....let me know Dale

Hey has anyone moved thier coil buckets? any advice.....

Hey whats up? I got done doing a 3"cut and turn on my 1991 dana 35. It all worked out great. Truck has 8" skyjacker coils and a 1 inch spacer under the spring...and it aligned with no trouble using a 4" drop bracket. My question is the front right side shaft that goes from the differential to...

Hey Gents, how is everyone? I am looking to get rid of my 35x12.50x15 tires and goto something like 37 or 38 inch tall tires. Problem is they only seem to make them 15.50 inches wide in a mickey thompson mtz radial or radial baja claws. I know with the 5.0 and my 5.13 gears i should have no...

Heyllo Gents, I have a 1991 Ranger STX that I am shoehorning a 5.0 into...i would like to use the t-5 tranny along with it. I just think a 5 speed would be fun. So obviously i need to go with a divorced t-case. I was talking to a guy on the west coast that was going to sell me a dana 24,. Can...