Search results

who cares

Bronco II with 4.0 from exploder. Starter keeps running after engine starts. Has new starter, 4.0 style with external solenoid, starter relay, batt cables and new battery. Right now the hookup is batt cable & fuse panel cable to right side of relay, starter main and solenoid wire on the left...

Getting around to putting this BII back together for the last time. Installed the Skyjacker 6" drop brackets and bolted up the beams until I saw this I moved the beam and the bracket is whisker close. Like whacking the alum diff close. This install shows the drop bracket straight up and...

https://the-shiftster.myshopify.com/products/the-shiftster

When adapting D44 TTB knuckles etc., to Exploder D35 beams, the common practice is to remove the inner layer of steel from the beams lower ball joint location. Why is this done? https://www.flickr.com/gp/140157233@N08/6Ca68P

I'm in the process of rebuilding spindle and hub bearings from either an F-150 or FSB. The problem is the new Timken bearings won't slide onto the spindle. The old bearings do, snugly, but the new bearings are getting hung up and just won't go on. I did a light clean up with emory cloth but...

'89 Bronco II, fuel lines out of tank, one is vertical the other horizontal. one is 5/16 the other 3/8ths. Which one is the supply line to the filter?

I have read that an Explorer 8.8 is the same from '91 to '01. Discs, drums, no difference. I ordered some axles from Dutchmans in ID. I got the axle sizes from JBG which was 30 11/16 and 27 13/16 ths. Imagine my surprise when the axles I pulled outa my '92 8.8 were 30 1/2 and 27 5/8ths...

http://www.offroadxtreme.com/news/video-ford-raptor-in-ford-bronco-clothing/

89 BII 1992 4.0, headers?? These?? http://www.summitracing.com/parts/hed-89400/overview/make/ford/model/explorer/year/1992

http://www.wchstv.com/newsroom/eyewitness/130401_15039.shtml

Just got my new issue of Bronco Driver mag last nite and saw a couple of cool items in the "whats new" part of the mag. James Duff is now selling replacement hardware for BII's body mounts. The kits replace the press together factory items with steel spacers and frame plates to replace or...

I'm getting ready to put disc brakes on my Early Bronco D44. I was talking to some friends who suggested I try to get the chevy disc setup for the D44 over the Ford version. I can get the Ford stuff brand new as a kit but the chevy stuff would be a scavenger hunt. Any ideas why the chevy...

http://www.msnbc.msn.com/id/43053263/ns/technology_and_science-tech_and_gadgets/ http://en.trecol.ru/pokupatelyu/modelnij_ryad/#center

http://www.drudgereport.com/ somebody lost his mobile home and his BII

I'm going to build a couple of spare D 35 shafts for my B II's. I went to the local NAPA to get 5-760X Spicer joints and was met by the standard slack jawed stare. Long story short, I ended up on line looking for the joints and ran across some Alloy joints with greaseable caps and full circle...

I'm tired of replacing the bearings in my D35. I've been reading up on the D44/D35 hybrid, Todds writeup here, The second wrtiteup here, (I forget who wrote that one), the 6 pages on the Explorer forum and the 94-96 FSB spindle article here on TRS as well as 4x4 Junkies writeup on actually...

Whadda sweet ride!

I've heard that the modules fail when they get hot, how about when they get cold? A week ago we got some -35 weather. I drove my 86 DD home the night it got super cold. Less than 12 hours later it wouldn't start, neither would the other 4 running B II's in the yard. Luckily my F-250 started...

Does anyone know what size the bolts are:dntknw: for the spindle are on a D 35?