• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Search results

  1. Jraymer360

    ttb hubs on an ifs?

    Tried to google, didn't come up with anything. My brother is putting a straight axle under my old ranger and my auto hubs don't work. I'm gonna take the manuals it has on it and put them on my new truck. Can I do this? Thanks guys .
  2. Jraymer360

    cutting down explorer reciever to mount to a ranger

    So I have a 94 and a 99 I need to put a hitch on I have an exolorer reciever that I want to cut down and weld to be able to fit the frame rails. Is that safe? I dont have a picture of the hitch but its just 2x2 square stock with the brackets welded on the end. I'd probably take it to someone...
  3. Jraymer360

    2000 Mountaineer Rough Idle, 4.0 SOCH motor.

    Okay so it runs fine when warm but idles rough and dies when cold. i got it to idle decently, but still rough. You can hear an obvious vacuum leak. i've researched this problem and i've come up with this : the intake manifold "O-rings" need to be replaced. is this the same thing as the upper...
  4. Jraymer360

    so my brother put 8.3x24 tractor tires on my old ranger.

    he also put a stack on it! working on cutting the fenders and putting in another transmission atm. thought this would give everyone a laugh.
  5. Jraymer360

    Picked up a decent 4th gen!

    Got a few cosmetic things wrong, needs a new rear bumper and i need a towing package, came with the stock 16's and some older stock 15's painted black. prob gonna go and try and find some stock size mud tires, do they even make them? has a little bit of rust but i do live in michigan and picked...
  6. Jraymer360

    want a nitro rc, Good starter rc?

    Looking for a used RC on CL, What should i look for? not looking to spend a ton, like 200ish. 4x4 would be nice.
  7. Jraymer360

    Possibly getting a better truck.

    my trucks a pile. i know it, everyone i know, knows it. :) gonna give it to my brother and let him have fun! however i'm getting 4000-4500 for a new truck soon. looking at 98+ rangers with a 4.0, 5 speed, 4x4 ect. maybe even 95+. found an 02 with 197k miles 4.0 ..automatic though :( but...
  8. Jraymer360

    Front diff gasket, can't find it.

    not really sure what 100% the name is for it..but it's like the rear diff cover gasket, just for the front differential. would it be fine to just your RTV? Looking on rock auto atm and cannot find it.
  9. Jraymer360

    Bolts through cab mount locations, Pro's and Con's??

    so my cab mounts are still wasted making it unsafe to drive and my body isn't in the best shape. to do it the right way i'd have to put a new radiator core support in and my cab is a little too rusty to save so i'm just going to replace the whole cab later on down the road. for now, would it be...
  10. Jraymer360

    That's a big ass leaf spring!

    http://annarbor.craigslist.org/pts/3583869492.html :icon_confused:
  11. Jraymer360

    possible NSS Problem.

    She wouldn't start like normal when i changed the transmission but would start when i jumped the starter solenoid. wouldn't shift out of 4x4 ( was in low, i had to pull the shift motor off and put it into 2wd.) it also won't shift into overdrive. i was getting a check engine but i don't think it...
  12. Jraymer360

    Need someone with photoshop to put a cap on my truck.

    trying to figure out what my truck would like with a cap, or if someone has a lifted ranger with a cap, that is black, please post it up. i looked it up and all i could find was threads about lifting or threads about caps on stock trucks. -_- i will provide pictures Soooooooon!
  13. Jraymer360

    Need some help scoping out a possible project...

    http://detroit.craigslist.org/okl/cto/3434596913.html It's a 74 Charger 318/automatic for those who are too lazy to copy and paste :) the guy offered me it for my ranger and since i'm driving my dads truck indefinitely, i might try and grab a project. i've never done body work before and i'm...
  14. Jraymer360

    Plan on doing Body mounts/bushings...

    i plan on doing the body mounts as 3 of them are pretty much gone. one is still on..yay. gonna have to do a core support for the front to as the mount up there is missing >:( If i get these ( http://www.summitracing.com/parts/ptp-6-106) What hardware from here do i need to get (...
  15. Jraymer360

    Whining noise...

    Don't know whats wrong, it whines when not moving, it's a really loud whining noise...i just changed the transmission with another. Truck kinda bogs down when put into reverse. Whine goes away at higher speeds. that or i can't hear it. Goes away when revved over 2000 or so rpm....
  16. Jraymer360

    why does this not look like a 99?

    http://columbus.craigslist.org/cto/3385949473.html But it has the openable doors... :dunno:
  17. Jraymer360

    94 Ranger as a donor.

    Found a 94 5 speed 4x4 truck that's been sitting for a year or two for 600. if it's a 4 liter everything should swap on my 93, right? i don't know of any changes but i'm sure there is some...? Needs a throw out bearing. but i probably would have replaced that anyways...
  18. Jraymer360

    So...Apparently a ranger is as bad as a 2 wheel drive offroad.

    My buddies are trying to troll me or something and are saying my truck sucks as much as a chebby 1500. trololololol.
  19. Jraymer360

    Silly people...

    Uses the same pictures as the previous owner! http://detroit.craigslist.org/okl/cto/3351218691.html Previous owners post : http://monroemi.craigslist.org/cto/3258446363.html i offered him 650 :icon_twisted:
  20. Jraymer360

    325/60-15 BFG A/T's on a B2

    Is this even possible? They're so wide.. http://detroit.craigslist.org/okl/pts/3345412069.html I'm talking about a small lift like 2 inch or a 3 inch body lift.

Sponsored Ad


Sponsored Ad

Top