Search results

Just replaced my engine a few days ago, I had blown a headgasket. So I got a new to me 93 4.0 out of the pick a part yard for 100$ eithe 90k or 190k on the odometer, but it had been T boned so I assumed the motor was good. I put the motor in, it ran great like I knew it should, didn't miss a...

Ive always wanted to figure out a way to add a couple of seats to the B2 for those occasions when you want to fit more then 4 people. originally i thought about putting 2 of the Ext cab ranger jump seats in the cargo area of the b2 behind the rear seats but today at the junk yard i had a...

Is the big fan clutch nut a reverse thread on the water pump? I can't remember My two new rangers a 2000 4.0 2wd std cab N a 94 4.0 4x4 man trans :D There both getting head gaskets right now Sent from my iPhone using Tapatalk

Ok so I swapped a 91 4.0 into a 89 bronco 2 it's a complete plug in swap, it runs great everything works (And no turn signals, but hazards work fine.) don't know if that's related... But I'm getting no blower motor, I know in 91 they added a relay, and changed the fuse location from inside...

So I know the m5od calls for ATF, I grabbed a gallon of the Oriellys Autoparts all purpose ATF n a qt n a half of the original Lucas oil stabilizer, it says on it you can mix with ATF I've seen what Lucas does to oil so is assume it's going to have a lot better lubrication My m5od came out of...

Okay guys I'm going to try to make the most complete build thread I have ever made to date with lots of pictures and such. I'm waiting for my ride to get back then I'm picking up a fresh clutch for the M5OD trans and wading over to my cousins pole barn to complete the swap in 1 day!!! I know...

Ok so I swapped in a complete 92 harness out of a ranger in my b2 durning my 4.0 swap I wAs originally going to use the old 86-88 style switches but after many confusing conficts with a test light and wiring diagrams I opted to suck it up and buy the later multi switch and headlight switch...

Ok so I'm moving my build thread from the b2 area here to get a little more traffic and insight from the experts So here is the build plan, Starting with my 86 bronco 2 it's got a 90 4.0 and dash and front clip It does need a little tlc, and I'm working on that I'm keeping the 78-79 axles...

So for the last few weeks I've been using the tapas all app for my iPhone and its great for checking the forums when I'm on the go, But it keeps on popping up a message that makes me have to relog into the forum to get it to refresh and update its getting to be a pita!! Here's the message Also...

I'm not running ac or a auto trans so my question is , will the 2.9l radiator hold up behind the 90 4.0 I know the warmer you can run your engine the better fuel mileage you will get I have the 2.9l radiator in now, but it has a pretty big leak in her so I'm always adding coolant, I'd like to...

So I finished my 4.0 swap in the 86 I have just a few minor problems First the bigger one She starts up cold like a bat out of hell Once let her set and idle she will idle for about 15 mins until she gets good and warm then she just chug a chugs and does out When I try pushing that gas it...

What I want is full size axels under my b2 I've seen a few with full size axels and some lift and I love the look. I'm up for anything I know there's going to be some cut and pasting I also am looking to get 3-6 inches of lift.. I've heard of using early bronco axels, But I wouldn't mind a...

Please any help would be appreciated links or scanned images!! Thanks

Starting my build thread to give you guys some motivation to do your own 4.0 swap !! Here's some picsstarted ripping her apart the first gen front end is going bye bye. the old 2.9 is coming out its out!!

So I'm working on the 4.0 swap and I really need to find these evtms to make things a bit more clear, I didn't plan on using the new stlye steering c

So I think I have the basics covered I've done this swap once before in a 89 b2 so it was a lil easier then this one is gonna be, I have a 86 b2 made 10/85 2.9l efi The donor is a 90 ranger 4.0l I'm not sure if it is auto or man trans I'm guessing auto, I know the harnesses are the same I had...

I've never seen this clip or had to do this before and you can't really get to it, and I don't want to break my speedo cable.. I already broke the clip, here's a pic, what's the secret??heres before I broke it N after

Okay so finally got the beast road worth but their is still a few hiccups. 86 b2 man trans 2.9l efi Put all new motorcraft spark plugs in yesterday, it ran a lot better after that, wires looked visually appetizing, so going to wait on those for now.. But... She doesn't want to start in the...

This is my first b2 with a manual trans case, it's the original in the 86 although it was built in 85.. When I bought it I asked if the 4x4 works he said there was a belt that was broke in the t-case?? I was thinking belt?? It's a ford not a Cadillac, lol what I think he was talking about was a...

so i have a 1986 b2 500$ picked her up last friday she was sitting for 10 years i got the mouse nest outta the intake, unstuck the throttle body, and she fired right up, after i put a new ignition lock and tumbler in. i backed her outta the drive and went to hit the brakes and they went...