Search results

I just recently bout this explorer and the abs sensors are not hooked up what I need is the size of the bolt that hold the front sensors on as mine are MIA I need them for my speedo to work properly and my abs light to go off

thank you it has its dings and dents as well as some rust. i did however finally get around to taking the drivers side step rail off and it has a new exhaust installed nothing major just a simple setup my brake pedal went straight to the floor the other day so i though i busted a line but with...

took it off road for the first real time nothing serious clutch is still soft i was pretty impressed with the tires performance i thought for sure i was gonna be stuck down their

it was the master and the line the master was leaking fluid when i to it out and turned it upside down and the line wouldn't close its self off when i disconnected it so i replaced both of them and now im just trying to get it to bleed i tried the bleeding Technic that precision clutch did for...

im having problems wit the 5spd again not holding pressure some how their air in the line or my master failed the exhaust snapped on me also nothing line accelerating going from a low rumble to somthing that just has a cat installed talk about loud :icon_surprised:

yes most likely. im going for the wow factor and mileage im not looking for insane torque or power the TDI is what im leaning towards the most their easy to get a hold of

As the the truck stands now nothing special happened unfortunately i did install a 5spd and a manual transfer case and as you can see i installed 31s with stock lift. i did not buy the other truck as i would have just wasted my time it was block lift in the rear and drop brackets up front...

bout it for 600 bucks :thefinger: has the 4.0 that needed new head gaskets transmission already had a shift kit installed (from what im told cant prove it so its up in the air) has 60,000 original miles custom paint, bumpers and brush guard painted to match interior is 8 out of 10 future...

Has anyone put a 360 in their ranger and how do you like it I can get a pretty good deal or the motor trany and transfer I don't wana buy it if it's not a good swap Sent from my SM-G900V using Tapatalk

7.3 turbo dually 4x4 All stock only thing Im doing to it is Fix the rust Replace the driver and passenger door Get a new tailgate New mirrors Black grille Replace chrome(not a big fan of it) New wheels New head unit New paint New chip

I just put all leds in the rear of my honda prelude. Ever since then my park lights come on when I push the brake pedal. Also my brake lamp warning light comes on only when the headlights are on. I have put the regulators on the turn signal lights but they still blink fast I do not have leds in...

The day I got it Nice and clean The bad Major things Gotta remove the entire roof skin an put another one on and replace the left fender and strip the old paint and find the air ram internals Alot of miner things to The car sat in a barn for a few years had about a 1/2...

Anybody running 20s on their lifted trucks. I have a set of to got to my ranger I already have a set of 15s with 36s on them for off road use but I Wana know how the 20s ride with 35s or 37s on them

1987 ford ranger extended cab 4x4 standard This is it completely stock at first. First I changed the wheels Then I gave it a face lift After all that I took the bed off realized I need shock mounts hangers shackles shocks and body mounts. And needs holes fixed in the frame...

I'm building a ranger that I'm Gonna use to wheel an play but I know of no we're to go an this well not be a road queen or trailer queen

When I bought my truck it didn't run an the wheels didn't match an had major rust First was the 4.0 swap The one of a kind manual 5sp The new dash After I came home from deployment got the 20s on static 3/4 inch drop Before After New lights an grille

This is my explorer As it is currently 4.0l 5spd auto transfercase Suposly 11inch lift Sitting on 36x12.50x15 super swappers All stock on the inside an under the hood Rear end is a explorer 8.8 an front is a d35 ttb Gears unknown One bad spot on rear wheel well Plans are to remove lift...

So my step dad found this for me ive seen it ona few rangers some of them I liked it on some I didn't. Im not sure if I wana keep the bed bar in or place this on it.

this is my explorer it well be kind enough to offer its d35 ttb for the ranger along with the lift that's on it an the 36in swampers I have future plans for the explorer but that's another build for another time I also got ahold of a ford 9 inch rear with disc brakes that well be going on it as...

This is my 1986 ford ranger 4x4 auto with manual transfer an the 2.9l its currently all stock excepted for the 31s. this is my baby i gave up 5 summers of my teen life to get this truck from my grandfather. i lost it about 3 years ago to the impound yard on the day before Christmas so you can...