Search results

Hello. I have a 1998 Escort wagon, which I have owned for 1 year. It has 223 000 km on it. The other day, I stopped to get gas, and upon trying to start the car it wouldn't fire up. At first, it half-started, then stalled out. After that, it will not turn over at all. You would get one loud...

Went to start my truck to get it out of the way for the moving truck yesterday, and it wouldn't start. I think its the fuel pump. When the key is turned to on you can hear a click but it doesn't make the typical whirring sound. Anything else it could possibly be other than the pump? How do I...

Im lifting my bronco II. Using stock ranger blocks and explorer leaf springs to get around 4" lift. Im at the point of bolting everything back together. After a hell of a time dealing with leaf spring bolts and everything I have FINALLY gotten to the point of reattaching the axle with the...

So Im in the middle of lifting the rear of my Bronco II, but I cannot get the bolts on either end of the leaf springs to move. I can get the nuts off of the rear side, but the bolts themselves, both front and back, are not going anywhere. I assume they are seized into the bushings...? Any...

Okay so I bought a 98 escort wagon recently, and it has a few problems I was hoping you guys could help with. First, dash light dont work. The warning lights (Check engine, turn signals, ect) all work fine, but there is no illumination behind the gauges. The dimmer works properly on the center...

My wife has a 98 Dodge Caravan, 3.0l. Recently, it started acting up. Whenever I park on a hill, even for a short time like 10-15 minutes, it runs really poorly when I start it again. If I park it on nice, flat ground, it doesn't do this at all. Drive it a few blocks with very little power and...

Im putting a 4" lift into my bronco II, and I am trying to figure out my best option for the driveshafts, which leaves me with a few questions. Lets start with the front... 1a) Will the stock B2 front shaft hold up to 4" of lift? What about 6" (thats the next step, when I have a few more...

Im in the middle of flushing my engine before I start installing my lift, and Im scared to go any further until I diagnose wtf is up with my temp gauge. Before now, I dont recall having any issues with the temp gauge. (Its been my back-up vehicle for 2+ years now, doesn't see a lot of use...

Well the title pretty much says it all. I have been removing my AC components, and I just modified my blower housing and took the part out of that... Im just wondering what is the best thing to do with the wiring? Also, I appear to have a vacuum line that comes from the intake manifold that...

I was just on Jims store site, and came across this. http://www.jamesoaksenterprises.com/index.php?main_page=product_info&cPath=57_63&products_id=108 Its a big-drop pitman arm from Procomp, and its only $70! Thats basically 1/3 the cost of the skyjacker one! Anyone have one of these yet? The...

Okay so my friend has a 92 grand caravan, with a 3.3l engine. The other day, it overheated, so he pulled over, let it cool off, then finished driving home. Later that day he noticed he has no reverse anymore. After resting a day, still no reverse. (Previously he had the transmission lock in 2nd...

Hey I was going to modify the blower housing on my truck. I just ripped the AC parts out of it, and now I wanna cut part of it back so it takes up less space in the engine bay. My question pertains to one plug on the AC side of things.(Green circles) Front side/plug. Back side. My...

I was just ripping the AC out of my truck (parts of hoses have already rusted through and stuff. The system is trash...) and when pulling something off, condenser maybe? I noticed what seems to be my blower motor attached to it... That is my blower motor on the left (1st pic) right??? I...

I am in the middle of replacing my fuel pump, because Im pretty sure thats my problem... I only had one quick question, about checking for voltage at the pump. There is 3 wires, 1 is green, the others are both black. Their order from left to right is green black black. The middle black wire...

So I went to leave an hour ago, and my van wont start. When you crank it, it sounds like its trying to start, it just doesn't catch. Before, when you started it cold it would be pretty rough to start, didn't sound very nice... Once it was warm, it would start with very little effort, and not...

Hey I came across these shackles at autozone, they are supposed to be belltech 6400 clones? http://www.autozone.com/autozone/accessories/Superior-Automotive-2-pcs-rear-lowering-shackle-kit/_/N-25n2?itemIdentifier=204654_0_0_ Anyone use these? any experiences, good or bad? Thanks.

I just pulled my valve cover to replace the gasket because my engine is a oil-covered mess... And I found lots of thick brown sludge over everything. Its all between the springs, on the bolts, everything... Any idea wtf it is? I was thinking previous owner was trying to use some of that stop...

I am interested in picking up a cheap shotgun soon, and was wondering if anyone has any experience with the H&R single shot guns? The two models that I am thinking about are the Tamer, and the Pardner... http://www.wanstallsonline.com/h-r-model-tamer-20ga.html...

I have been having a problem with water leaking. Every time it rains, it leaks. I have had to remove a large chunk of carpet because I just could not get it dry. I also started pulling off plastic trim in the area... and it appears to be leaking from where some wires are coming into the cab...

Hey I have some ford explorer leafs I was planning on sticking under my b2, and was wondering about opinions on adding some of the stock leaf into the pack to get a bit more lift? I was thinking cut the eyes off and use the main leaf from the stock pack, but will this really get me any more...