Hey guys I have an 05 mazda b3000, I broke the passenger front mud flap on my truck and I'm looking for a new one. Anyone have any suggestions on where to get one? I'd prefer used but I'll buy a new one if i can't find a decent used one.
So Today I finally pulled the heads on my 05 mazda b3000, there is a ton of old gasket material left on the block. So my question is what is the best way to remove it. The engine is still in the truck just to be clear. The heads are going out to a machine shop at some point this week so the...
I have an 05 B3000 and i have a check engine light on for a miss in cylinder 4, done plugs and wires, did a compression test and it has lower compression than the rest of the cylinders. I have to pull the heads next, I'm thinking/hoping its a bad valve or valve seat. So I was wondering what...
recent got a full width 8.8, with a lock right and a 4.88 gear set... the bad is it has an axle that is snapped at the inner end of the axle tube...
so i cut the tube off to get to the end of the axle... thank god for the porta-band...
now i don't know how to remove the axle to remove the...
is there a way to test an o2 sensor like measuring resistance across it or something of the like? I think mine is toast in my B2 but i was given a whole bunch of parts with it when i bought it and there are like3 o2 sensors there and i want to test them if possible before I replace the bad one,
My trans is smoked and won't go into any gear but 3rd and rev.
I'm trying to find a replacement trans for my B2, but i really can't afford to replace the driveshafts right now along with the trans...
So my first question is which trannies are the same length as a fm 145??? Because I have got...
so i blew up the fm145 or fm146 in my broncoii last night coming home from school... so my question is if i put a m5od-r1 in my truck will i need new driveshafts, or will my existing ones work... and 2 i have the pos tulip driveshaft so would i be better off swapping that out while i'm...
so so will a m5od-r1 hd trans out of a 2001 or newer ranger or exploder, bolt up to an 87 B2 with a 2.9 v6... if so do you need a different plate for the trans hump or anything else???
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.