Search results

Do I know this is a vacuum leak somewhere. I'm fairly confident it's leaky around the throttle plate because I just took the upper manifold off and thouroghly cleaned it and all the related components, including the throttle body. I learned from s different thread that the throttle plate has a...

I just removed the IAC, throttle body and upper intake plenum and cleaned all the carbon build up off. That fixed the problem I was having with it taking 3-5minutes to idle down to 1100 rpm everytime I started it. Now it takes 1-2 minutes to find it's idle speed at 900-1000rpm but once it is put...

What is the plastic ball shaped part in my engine compartment. It has 2 vacuum lines. And what is its purpose?

I got a code referring to my IAC valve, so I removed it for cleaning. And boy, it sure was dirty.which led me to see how it got so dirty.after looking inside my intake manifold thru the throttle plate,I can't believe the amount of carbon build up. Now what I want to know is, what causes this...

Hi I'm fairly new to this site. I've had my 96 mazda for about 5 years and absolutely love it. She's no beauty queen which is fine with me cause I use my truck like a truck is made to be used. I've learned alot of this few years as I do most of my own repairs. (I've worn out 2 Chilton's from...

Recently I've been having engine cranks but won't start. I've done all the basic troubleshooting. I have no power to my fuel pump.The inertia switch is also not getting power. I've checked all my fuses and tested both sides of the relays,power and control,they are working properly. I think I...