i was meaning if when i put the timing cover on i didnt center it properly. (I dont remember if it has dowels). i also polished the harmonic balancer before installing it so that shouldnt be the issue. ill see if i can get the balancer pulled off in the next week or so and take a look. it could...
Hello folks! Its been a while since I've posted here (no problems with the truck since the clutch knock on wood). However I recently built a new motor for it last august (high compression, valves, springs the whole deal) however ever since I installed it I've had a small leak coming from what...
its not as much that as it is that i need SO many parts. the engine i bought came with no wiring no sensors no oil pump no alternater etc. i need so many parts and i also realized that even tho it would be rad im only 19 and saving money is more important right now.
Ok gents.... Been a crazy few months but unfortunately its time to move on. Im selling my 2jz shortblock (dm if interested) and moving onto smaller projects around the house and mainly getting my current daily ranger finshed restored. Im only 19 and the parts for this engine are just too pricey...
it also has a new master already. it was bled in the past and then replaced with a prefilled master. I have a new line but i dont want to put that on and contaminate it with fluid from the slave if neccesary.
important note is my clutch feels perfect when its cold but after 15 to 30 minutes of...
Hey all! unfortunately im back with more clutch and transmission problems. looking to fix them for good this time. First of all my clutch worked fine when cold but when hot it wouldnt disengage all the way. (looking over the forums sounds like thats a slave cylinder failure even tho i did that...
ok so some unfortunate news. my daily driver just had the clutch slave go out. 2j project is out while i source another daily and get my current ranger back up and running. i still plan to do the 2jz ranger swap but life has other plans for the next month or 2. i will keep the thread updated
Any details on what entails "built" i plan to do a 9 inch in the long run since i want this motor to make 1000 at least once for internet clout lmao (cant have a supra motor make less than 1k these days) but i want to run the 8.8 for as long as i can and build it for as cheap as i can prior.
I...
This is a head with basically identical parts to what i am using that made around 1600hp also my new pistons and rods just for sake of showing off shiny new parts
Im begining a 2jz swap into a ranger. Ive seen one other person do this here but its super old and none of the photos are accessible now. I plan to document this very detailed and keep it updated here. I would love to answer any questions and i am open to any advice
DETAILS:
2JZ: (currently in...
i have the entire long block from my old engine build. engine is pretty worn out but i can freshen things up in the machine shop for anyone interested. just send a message below with something your interested in and an offer. i am pretty flexible
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.