Search results

Ended up being a bad relay. Appreciate the help!

Thanks for the very detailed response. I'll try figure it out later this week. I did try to get voltage at the plug and was getting zero so I'll look into testing the sensors and relay first

I just started having issues with my AC taking forever to kick on. Recharged it thinking it might be low on fluid but that didn't help. Sometimes it takes minutes before the compressor engages. Once it's on it blows very cold and I can also shut it off and turn it back on while I'm driving. As...

Well I'm unsure it's fixed all the way. The super irregular idle is gone but it still wants to hold the idle between shifts and it still doesn't always want to idle where it should. It's a lot better but still seems off. I'm gonna give it a couple days an see if it's the the computer trying to...

So I brought it to a local shop who I trust. I have the moddbox supercharger kit on there. Turns out there was a cracked hose between the bypass valve and intake. Don't know how I missed that when I sprayed down the entire engine bay but I'll be picking her up later. Thanks for all the suggestions

The idle drops right down to 400 or so with the IAC unplugged. I didn't think it was a temp sensor because like you said it's not throwing a code but also because it still does a full warm up circuit. It will start around 2k or just over and then as it warms up drops to 13 or so. So it seems...

So 2 nights ago my truck started idling at like 1400 and hangs/jumps to like 2k-2500 between shifts. Got the code so I put in a new bwd tps. Still the same issue. So I replaced the IAC too and that didn't work either. I haven't checked the voltage on the tps yet but I know it's supposed to be...

I got a new bed for my truck being that the crossmembers and floor rusted out. Big shocker I know. It's the toreador red metallic and still in pretty good shape. My biggest concern is painting the bed to match and having it look way too new or more glossy than the rest of the truck. I'm going to...

2 days ago after warming my truck up I started noticing a bleach like smell coming out of the engine area. I noticed it got sucked into the cab a little while warming up the truck. Checked my coolant and I was a little low but it's definitely not the typical coolant smell I know if it's that...

So a few weeks ago my truck started making a quiet squeal when i turned left. It has been progessively getting worse. I noticed my right rear wheel bearing had a lot of play so I pulled the rear end and the right shaft was all messed up. Installed two new bearings and a new passenger shaft but I...

Anybody have any experience with this code? Can't seem to find much about about it. What I did find either said faulty wheel speed sensor or the hydraulic abs pump. Either way my abs light is on, brakes work great just no abs

my 03 bed is starting to rot out. refresh my memory. any short bed from 93 and up should bolt right up correct?

Just replaced my front right bearing hub assembly. After I put everything back together the steering wheel chatters when you straighten it out after a turn. Any ideas?

just had to replace one of my bearing hub assemblys on my 03. put everything back together and the abs light was on. firs thing i checked was the abs sensor. sure enough it must have cracked when i removed it from the old hub because it was exploded. so i put i a new sensor, started it, no...

so i bought my 03 and it didnt come with fog lights. so i just went ahead and ordered a whole new bumper,valence,brackets and lights. my bumper was starting to rust through the chrome anyway so win win. while i was looking for switched power behind my dash when i installed my boost gauge i...

so i've been having the issue since i bought the truck last year. the typical abs kicks on when coming to a stop. especially if the wheels are turned. but, i noticed last winter if you lock them up the pedal doesnt keep working. you feel the abs kick in and then the pedal is just hard and you...

hey guys. installing a boost guage in my 03. i knew pretty much every wire color and where to find in in my 93 but then new truck is a completely different animal. basically i need keyed power, a ground, and the wire that works with the dimmer switch for the light in the gauge. ground i can...

does anyone have a single gauge pod on their newer ranger? i can find double and tripples no problem but i can't seem to find a single for my 03

So I recently put new keys in my truck to lift it about 1.75". It doesn't ride terrible but I would like it better. My truck has the medium bars and the keys are backed pretty much all the way off even with the lift. Anyone switch to the soft bars with a 4.0L? How do you like the ride. I figure...

After i blew my last rangers motor i couldnt just walk away. (old truck) i had to stay in the family. so i picked myself up an 03 Ranger 4x4 4.0L with a 5 speed. 104k on the motor and really clean. talked them down to 7250 after doing some serious nitpicking on it. exactly the same as my old...