Search results

@bronco2fan I'll let Andy have the final word but that does not look like the 2150 I used. There's an awful lot of electronics on that one. Perhaps you can strip off some/all of those things (perhaps not). My carb didn't have the mechanism to the right of the fuel filter (and below the bowl...

I know this reply is 3 months late but I figure someone else might be able to benefit from my experience. I swapped in a slider over the summer (of 2023). I used 3/8" butyl tape (from Amazon). I also chose a weekend where the temps were north of 90* (so that the tape would be super-sticky, flow...

I will have a white one available soon. It has some rust in the lower seam, passenger side. It's pretty heavy (even gutted) so I would guess shipping would be expensive. LMK.

I see them on FB Marketplace and I live in the NW Chicago 'burbs. TBH, I haven't seen any recently but they do pop up from time-to-time. Chicago is a little closer than Flint. So, if you're considering a drive east, you may want to keep an eye on Marketplace for northern Illinois.

I thought a V8 was an option on the SporTrac. No?

Replied to the PM

Is Chicago too far? I have a set of these that need to be re-conditioned (these are not mine, just a rando eBay pic). The tires are shot but still hold air except for one wheel, I yanked the valve stem out because I was trying to strip the clearcoat. I have lug nuts and center caps...

Hey TGR, Could you post a picture of the headlight retainer clips/brackets? I think I know what you're referring to but I want to be sure they're the same for my '11 RCSB XL. (PM sent as well) Thanks!

@bergz0 PM sent regarding the mudflaps.

@Lefty Boy, that looks really nice. My truck didn't have such conscientious previous owners (it's an '11 RCSB XL with few/no options - a basic work truck). However, I did have the underside of our '17 Expedition done with Fluid Film. That's done a great job of keeping corrosion at bay. My...

@Lefty I need to do my diff cover, too. They have a tendency to rust thru in this area of the upper Midwest. I may just replace mine.

@Lefty I appreciate that level of detail but the truck isn't worth the effort (I guess I wasn't clear enough describing the current state). It's in good condition but it has some minor dents dings. The tailgate I bought is that yellow/orange color and is in nice enough condition that a simple...

@Angry Possum I'm in a similar situation; I found a nice tailgate but it needs to be painted. My '11 RCSB was a work truck and, while decent, isn't in the best condition, body-wise. So, I was going to tackle the paint job myself. My question: how were you going to prep/scuff the old paint on...

PM Sent

It's a shame you're not closer to Chicago-land. I see them often on FB Marketplace and they appear to be in good shape with reasonable prices. A decent selection of colors, too. Oh well...

I'm guessing it means Bill of Sale only. But, maybe the OP will reply. I also understand that the "title your vehicle in Vermont" thing has come to an end or is a lot harder to do now.

I have owned a bunch of Mustangs in my day and recall the oil pressure sending units from the 289/302. IIRC, its the same unit as the one that is (was) on the engine currently; Standard Motor Products, PS60. Even the Motorcraft part number is the same; E6ZF-9D290-CA. Maybe I got three duds? I...

I tried three different sending units and installed an oil pressure gauge (which I believe came with the truck). The electrical units always read in the lower part of the scale. The pressure gauge read 60+ psi except when the engine was really hot (like when I was trying to diagnose a failed...

Well, with the 2011 model year Ranger, I guess I got all the goodies (including an 8.8 rear diff with 4.10 gears, in an XL :oops:) I saw a pic before I had the p.o. yank it out of his '97 Ranger SuperCab. (y) I installed it yesterday without issue (except cleaning up the old butyl tape which...

I wasn't trying to insinuate that Wikipedia was right. I just seem to default to their nomenclature, that's all. My fault. Still looking for sill plates (not trying to pick a fight :)).