• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Search results

  1. Bent Bolt

    Dirty rotten stinking piece of C4 garbage!!!!!

    Hard to say without actually being there hands on. Can you take a few pictures with the gear train apart?
  2. Bent Bolt

    Dirty rotten stinking piece of C4 garbage!!!!!

    Looks like you're not splining the direct clutch to the forward clutch drum properly. When you push on the top of the that stack , does it feel springy?
  3. Bent Bolt

    cummins ranger axle upgrade Q's

    Yeah I suspected that for awhile. Just got to the point I was tired of fixing the damn thing EVERY time I went out. Now I'm having fun spanking Jeeps offroad , upgrading and taking side hills like a H1. Next is getting a new body. Something in the 2000's with the opening back doors.
  4. Bent Bolt

    cummins ranger axle upgrade Q's

    And I'll add my 2 cents ( Canadian ) here. I had no problem with the D35 wheel bearing coming loose or ball joint life. Even made my own custom steering that worked pretty good. Keep in mind I don't drive on the street, trailer it everywhere. But I could not keep an axle shaft in it. All most...
  5. Bent Bolt

    85 diesel Ranger

    For anyone interested in the Edmonton area, there is a 85 diesel Ranger with complete engine at the 184th street pick a part.
  6. Bent Bolt

    Ranger coils

    Been awhile since I've been around here. Finally have time to mess with my Ranger. I installed a pair of used Duff coil buckets and new EB coils . Unfortunately the coils are way ,way to soft. Don't know what I was thinking when I bought them 190lbs springs. Anyways, what's the latest in...
  7. Bent Bolt

    wagoneer d44 vaccum disconnect

    Should be able to install a non disco axle shaft.
  8. Bent Bolt

    8.8 Hybrid idea

    Some of the old WWII 6x6 trucks used a transfer case with 2 rear outputs. The front rear diff was offset to the same side as the t-case drop with a driveshaft connecting the two. The back diff driveshaft was a two piece with the carrier bearing mounted on top of the front diff. Don't know if...
  9. Bent Bolt

    Length of RBV C5

    Anyone know what the length is of a RBV 4x4 C5 ? Bellhousing to T-case.
  10. Bent Bolt

    Jeep TTB

    If anyone was interested , he has it built and there are 2 videos. For those who don't know, this is a Jeep built for KOH 2011 with a much modified TTB D50 . http://www.pirate4x4.com/forum/showthread.php?t=829346&page=40 scroll down ,you'll see them.
  11. Bent Bolt

    TTB Dana 44 Knuckles EB axle

    Definitely won't work.
  12. Bent Bolt

    Torchmate Pirate build

    Don't know if this has been posted yet but here we have another TTB build. Custom beams. Looks freakin' nice ! http://www.pirate4x4.com/forum/showthread.php?t=924520&page=5
  13. Bent Bolt

    Reverse 8.8 Gears

    Same here.
  14. Bent Bolt

    Front 60 out of a burned truck?

    The F250 super duty's had D50 in the front not D60. So I'd pass.
  15. Bent Bolt

    D35 Chrome Moly outer axle shafts

    Anyone have any experience with these axle shafts ? http://broncograveyard.com/bronco/i-82089-chrome-moly-outer-axle-dana-35-ifs.html I managed to snap the left outer on mine last weekend.
  16. Bent Bolt

    My new steering

    Hope to have it installed by the weekend.
  17. Bent Bolt

    Praise for Jeff's Bronco Graveyard

    I ordered a EB TRE and a pair of Deaver coils last Sunday evening at about 9:30 PM. I specified using a Purolator account that I use. They called me Monday morning at 7:20AM to tell me that they can't use that account or carrier. I was amazed that someone called and said "No problem, use what...
  18. Bent Bolt

    K-link steering - AKA superunner

    What kind of bushings would one use on the idler arm on the center link of a scratch built K style steering system? I'm talking of a good and strong type , not a "that'll do" kinda thing.
  19. Bent Bolt

    D44 outer onto D35, pros/cons

    Outer D44 knuckles on the TTB D35 won't get you any stronger shafts. I think you either have to get some custom alloy shafts made or go SAS D60 or Do the same funky D50 your buddy is running on that wild YJ !!
  20. Bent Bolt

    d44 vs d30?

    If it is from a EB just make sure it is indeed a D44. The early EB did come with D30's and drum brakes.

Sponsored Ad

Sponsored Ad