• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Search results

  1. remington115

    1999 ford ranger 2wd 5.0 swap transmission options

    Ohhh ok sweet thanks @don4331 I also have done some work with HP tunners I gunna find out what I can do with that.
  2. remington115

    1999 ford ranger 2wd 5.0 swap transmission options

    yes yes yes this is info i needed!!! thanks so much @don4331 as far as balanced flywheel im kinda lost on this how would i know what one to get/ or get a costom balance? and also a tuner( do you know anyone) would i have to get the pcm sent out or get a sct or some kinda of obd2 tuner, or chip.
  3. remington115

    1999 ford ranger 2wd 5.0 swap transmission options

    So im thinkin im looking for a M5R2 in 2wd. I think with some drilling of the bell housing bolt holes. Now like yall said im not sure what fly wheel that will bolt to the 5.0 crank. and clutch and starter to match the flywheel. Im fairly certain that the slave quick connect is the same as the...
  4. remington115

    1990 2.3l 5 speed 4x4 trans swap to M50d-r1 hd

    Well unfortunately the truck was a complete bust! I got there and it was not a 2.3L it was 4.0 and thats not what ive been on the hunt for, He even tried to argue with me that it was a 4 cylinder . On top of it all I was like ok I can deal with a 4.0l but after a few mins off looking at it I...
  5. remington115

    1999 ford ranger 2wd 5.0 swap transmission options

    Ive just purchased a 1999 ranger single cab with a blown 2.5l ( melted a piston) and purchased a 1998 explorer 5.0 awd . I plan on swaping in the rear end. but my question is what are the transmission options? I want to keep it 2wd and manual. Just need info on what transmission from what year...
  6. remington115

    1990 2.3l 5 speed 4x4 trans swap to M50d-r1 hd

    Sweet thanks! I should be picking up the truck tmw. Im excited get it and get the truck up to par!
  7. remington115

    1990 2.3l 5 speed 4x4 trans swap to M50d-r1 hd

    Awesome so if my tail shaft and housing are ok then i can find a 2wd m5r1 and just swap them and bolt the transfer case up. Now lets say its not a m5r1 in the truck, will the drive shafts be the same for the 2.3l to the new m5r1 same u joints, lengths? also will I need to swap transfer cases or...
  8. remington115

    1990 2.3l 5 speed 4x4 trans swap to M50d-r1 hd

    Is it possible to swap the m50d-r1 hd to a 1990 2.3L 4x4 5 speed? Do I just do the follow the tech library for the swap? I bought the truck online and havent picked it up yet and im kinda confused on what trans it has in it but was told the 5 speed in it has shit the bed so to speak (no oil in...
  9. remington115

    Water meth

    Has anyone done water meth in there ranger if so was it worth it, did the fuel mileage go up, power,torque? i want to get really good mileage. i drive like 500 miles every two weeks and i want better fuel mileage.:icon_confused:
  10. remington115

    V8 swap

    so im sick of my 2.5l now time to step up to a v8. so i have 96 ford ranger 2wd . what would be the easyed swap. i want efi i here that the mid 90s explorer would be good i want to do a small build maybe a cam but i want something that will be reliable. also i want to do a 9'' rearend with disc...
  11. remington115

    2000 2.5 cam questions

    i know its been said so many times.so here it is i looking for a cam for my 2000 2.5l what are some good sights to find cams. i want a cam that is argessive and sets my 2.5 above rest.i have a intake and exhaust to let it breath. what specific duration of intake and exhaust and lift. do i need...
  12. remington115

    88 thunder bird build questions

    so i was wondering is this is even possible. so hear it goes. i want to get a 88 thunder bird turbo motor and do a build. is it possible to bore and stoke this motor.should i just bore it or can i do both and not blow the motor. are there suppliers that make stoker kits. what cam duration and...
  13. remington115

    drive shaft question

    so i swaped a 2000 2.5l ford ranger motor into my 96 for ranger. along with the trans. and rear end,and aluminum drive shaft. but when i did this i forgot to mark the drive shaft to the rear end and now about at 75mph i get some shake. i had it balanced but the i had to take the drive shaft off...
  14. remington115

    chip question for a 2.5l

    so i swaped a 2000 2.5l into my 96 ranger that had a 2.3l but it has the wirring harness from the 2.3l.so i want to get a chip for it so do i get the one for a 96 or a 2000? will it even work with the different harness and engine? is it even worth it?
  15. remington115

    Chip for a 2.5L

    this has been gone over many times, the best bang or your buck is a turbo or a v8 swap. you cant polish a turd unless you have a lot of money. search turbo
  16. remington115

    lets see your flatbeds

    i am thinking of building a flatbed and wanted to see some to get some a ideas:icon_welder:
  17. remington115

    fuel injector sizes

    never mind they are the 01 2.5 injectors
  18. remington115

    fuel injector sizes

    are the fuel injectors in a 96 2.3l smaller than the ones in a 2001 2.5l. my trucks running lean i just swapped a 2001 2.5l in my 96 but i am using the 2.3l fuel injectors. also its has a miss fire in cylinder 1 HELP!!
  19. remington115

    fuel injectors

    are the fuel injectors in a 96 2.3l smaller than the ones in a 2001 2.5l. my trucks running lean i just swapped a 2001 2.5l in my 96 but i am using the 2.3l fuel injectors. also its has a miss fire in cylinder 1 HELP!!
  20. remington115

    2.3L to a 2.5l

    so im swaping in a 2001 2.5l ranger motor into my 1996 ranger do i swap the computer and the wiring harness or can i us my old wiring harness and just swap computer because i dont have the wiring harness from the new motor

Sponsored Ad


Sponsored Ad

Top