• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Search results

  1. odie1969

    1987 STX 4.0 sohc done.

    Well I finished my truck a while ago and I have put about a 4000 miles on it. So it is time to show it off before I have to sell for a Family car. The start. the start of the dash swap form the 04 xlt. Now the finished project. And now the build specs interior: Has a dash...
  2. odie1969

    Escort mirrors on first Gen?

    Hey I was just wondering if anybody has ever replaced their flag mirrors with a set of power mirrors off a escort. just thinking it might be pretty cool.
  3. odie1969

    Need a Good ATV parts place.

    So I just bought meyself a 04 660 raptor and was wondering where everybody bought their stuff for the ATV toys in ones life. Im looking for goods like a nice set of nerf bars and possible a case saver to start out with. would like to end with a +4 long travel kit. But I have alot of...
  4. odie1969

    Need help pairing amp with polk MM840D

    Well I have had a polk MM840D for about a yr I have been running it with a kinda crappy 400w amp. But now the amp seems to sound like crap unless I touch the outside of the RCA jacks while I ground myself. If I run a ground wire direct to RCA it sounds like crap again. So Im...
  5. odie1969

    what brand locker is this and is it worth $150?

    Can anybody tell me what brand of locker this is and if it is worth $150. I talked to the guy and he said he had it in his f150 for about 6000miles before he pulled it to put in a ARB. he said he was running 4.56 gears. when he had it installed.
  6. odie1969

    Which A/c Condesors wil work.

    Ok So I did a sohc4.0l swap into my 87, So now my questions are Is there any chance I can find a condesor that will fit in my 87 that will acept the 04 lines? If not I have already looked into gettin new lines built about$80 bucks a apiece So I was wondering what would be the best condesor to...
  7. odie1969

    fuel pump died and now need a new one.

    My fuel pump died in my 04 4.0l sohc, So I have spent the day trying to find a new pump for it. but all I can find is a the fuel pump assembly for like $280 so what I would like to find is just the pump but I cant find one for sale. So I was hoping someone could point me in a direction to...
  8. odie1969

    V8 question 5.0-5.8l

    Ok so I have a 351 wind. out of a 84 bronco but my question can i take a wireharness and heads from a v8 explorer and place the 351w in a ranger while keeping the obd2 for emission issues. I understand I would need a after market intake like trick-flow or elebrock for the fuel injection a new...
  9. odie1969

    Vacum Diagram for a 99 Mountianeer 5.0l

    Hey Guys I just bought a 99 Mountaineer and everything fine and good till I got home and drove it the next day and the Check Engine light came on. I checked the Codes and they came up as p0171 and p0174 so lean on each bank. I will change the fuel filter to see if that will help. But I...
  10. odie1969

    Found a A-arm kit for the 98+ on Cl.

    Ok so I was roaming around CL and found a long travel A-arm kit for the 98+ and I wanted to see what you guys thought about it. The kit cost $1050. http://phoenix.craigslist.org/evl/pts/1330208666.html
  11. odie1969

    Has Anybody ever rebuilt a CCRM( constant Currnet Relay Mod.)

    Like the title states. I have finally tracked down part of my A/C issue with the Mustang. So I'm looking for a short between the wires on the A/C clutch and relay box. But in the mean time I was moving around wires and the CCRM box started smoking. But everything Else that is related to...
  12. odie1969

    A/C in a 96 mustang.

    Ok so yesterday The Girlfriend was sitting in traffic and the A/C started to blow Hot air. SO today I go out and look at the car to check the a/c pressure. Upon pulling the cap off the low pressure side to find a gaping hole blowing air out of it. So my question is Has any body ever...
  13. odie1969

    86 5.0 convertible.

    ya so today I was bored so I rolled down to the local scrap yard to see what was there and if I needed anything. well the yard has a Runs and Drives section. While wasting time in there I found this. A grill I have never seen before. A fiberglass hard top for the Conv. top and the 5.0...
  14. odie1969

    Lets Get together.

    Ok folks how does it sound. I was thinking we could get possibly Plan a good size event that everybody could get together. Maybe a camping trip around northern AZ. so the offroad trucks could go out during the day and find some trails. and the street trucks could go for a drive and try...
  15. odie1969

    Is auburn a real locker?

    I have been looking all over the site trying to find the info but I have yet to get anything. I know that the Auburn ECTEC(sp) is just a glorified L/S but I was on CL and found a guy selling his 7.5 with auburn locker for $100. this will be my DD and play truck till the other rig is done...
  16. odie1969

    So who Goes to MMA Gyms.

    So I finally decided to go out and get in shape, But wanted to do something that worked all the muscle groups and be interseting to me. So I found a MMA gym here in town, the Gym covers Boxing, Grappling, Gi and No Gi Jit ishu, and Strength Conditoning. and the Nice thing is they have...
  17. odie1969

    Looking For Mustang 5.4l Swap.

    Ya so the wife is looking at getting a newer car, and now I have one more car to play with. SO I would like to find a good write up on the 5.4l swap into the stang. thank guys.
  18. odie1969

    Save the Date on the Cheap

    Well after 9+ years of dating Me and the Lady are getting ready to tie the knot and make her a honest lady. But as I'm sure most of you know wedding get super pricey quick. So I thought that for the Save the Date Mag. I would try to make them up my self. So this is the final one. She...
  19. odie1969

    Stock radio with subwoofer?

    So my plan is to build a box to go between the two jump seats, the demisions will be 15.5"x5"x9" this will be .4 cu ft. and I'm looking at a 8" sub. So my question is How hard to is it to wire a amp into the stock 6disc. and Also is the 8" big enough to give a decesnt sound. or should...
  20. odie1969

    A-arm question

    I'm trying to find a set of A-arms for the ranger that will allow me more wheel travel and wider stance, kinda like a buggie susp. I would like to try to keep the stock spindles if I can and and coil spring set up. So I was wondering if anybody has ever built a set or knows of company that...

Sponsored Ad

Sponsored Ad