• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Search results


  1. Bringing back the manger!

    So several years ago this was a 96 Mazda b4000 that a member named legoms13 built. It was rolled and he did a cab swap to a 2000 ranger, then sold about a year and a half ago. They guy that picked it up thrashed on it and put a new motor in it. When I saw it come up for sale, I had to jump on...
  2. 1354 front yoke options

    I'm building a new driveline for my explorer on tons. Want to swap out the 1310 ujoint to a 1350. Don't want a conversion joint. Anyone know if they make a yoke for my case that holds the 1350? Need a yoke not flame cause I'm gonna grind it out to get more angle out of it. Sent from my...
  3. sexplorer build

    traded a tired beat down 99 ranger on 33s for the worst investment of my life, dude hacked this 92 explorer, everything on it was stick welded and trashed. I should have kept my beat down ranger but live and learn. here is is the day I got it, bald 37 inch E rated toyos, HP dana 44 3.73...
  4. no more doubler options?!

    so from what im reading on pirate4x4 d and d is gone and I cant get behemoth to return calls, emails, facebook stuff or anything else. he said he sold the strong box rights to some company but wont say who and no one can find anything... I really dont want to build a 1350/54 doubler cause the...
  5. high revs after fuel injector replacement

    98 2.5 manual tranny. got a bad engine misfire on cyl #4. replaced plug and wire even tho they were new, tried swapping coils, no change. that left me to believe it was a fuel injector. good compression as well. I figured I might as well replace all the injectors. I pulled the upper intake...
  6. ranger wont run... no power

    ok so the story goes like this, I have a 98 2.5 ranger, 146k on the clock, driving on the freeway, the timing belt snapped. towed it to a buddy's place and replaced the water pump and timing belt. recent work done to it before the timing belt, new autolite copper plugs about 300 miles ago...
  7. 98 ranger lowering question.

    I have a djm 4/5 kit ill be throwing on in a few weeks. my question is this. I want to still be able to throw my 800 pound quad in the bed, can I throw some overload bags in the back to help with the lad once I do the axle flip?
  8. anyone into a group buy for a doubler kit

    not sure if this is the place to throw this but I have been talking to the guy from behemoth doublers, and he is offering a group buy on the doubler kits for rangers. the more people we get in on it the better deal we get on it. he is also raising prices on the kits by 100 bucks after this...
  9. mixing HID and LED off road lights

    I currently have 2 Kragen 7" HID off road lights up front, but I found a good deal on a used 13.5" LED bar, anyone have any comments on mixing the 2 styles of lights? I am looking for a bit more light.
  10. hard start below freezing

    so I have a 99 4.0 and I just moved to a ski town, its been in cold weather before but never had this problem. yesterday and today in the morning both times the temp was around 10-20 degrees F. the truck will just crank, tried cranking it for about 15-30 seconds and nothing, then I held the...
  11. temp sensor help needed asap

    So my fan cutch burned up and I decided to put a taurus e fan in its place. I got the fan and my dad had an e fan summit racing install kit. it came with a temp sensor to screw into the intake manifold. I have 2 temp sensors in my intake manifold already, I was wondering what they both are...
  12. tranny dropping gear on steep hills

    so I have a problem with my 4r55e tranny. when Im wheeling and going up a steep hill, it will randomly drop out of gear. I cant get it into 1st or reverse. sometimes if I just rev the piss out of it, it will hop back into gear, but I dont like doing that... the fluid is pretty fresh, maybe...
  13. sac meet up at the end of this month or beginning of march

    bryce is moving to Guam next month, so we are going to go play around in prairie city, one of the weekends soon, he is going to be gone for a few weeks handling some stuff but he will be bac late this month or early next. probably on a sat or sunday if anyone cares to go out.
  14. january ranger meet

    nor cal ranger meet january 2012 So lots of talk about a big ranger meet, combining all the ranger forums, I figured we might as well start a thread on it, so far I have heard about going to marysville or grass valley, the grass valley meet would have more to do for everyone, marysville is more...
  15. rough idle and miss fire

    so my truck if it sits for a day will run really rough for 10-20 seconds before smoothing out, it has gotten progressively worse... If I go to the grocery store or something where its been sitting for less than 5 or 6 hours before restarting it starts fine, but if it sits all day or overnight...
  16. 98 2.5 throttle sticking

    ok so I am borrowing my buddies 98 2.5 liter manual trans ranger, I notice that sometimes (usually after getting on it hard) that the throttle seems to stick at like 3000 rpm or so, it will do this until you park it and let it sit. if you come to a stop the idle will drop back to normal, but if...
  17. Nor Cal chat thread

    hey guys the purpose of this thread is to chat and have a place for the nor cal guys to keep in touch, i have a feeling it will get pretty lively in here.
  18. sunday july 17th wheeling in nor cal

    going to prairie city with a few people just an afternoon thing, but if you wanna go play let me know.
  19. nor cal meet this sunday

    hey guys a few of my friends and i are going to go hit up prairie city or if prairie is no good, we are going to go into the hills, mellow group of guys i think my rig will be the gnarliest on 33s but all are welcome. let me know if you are interested.
  20. bumper question

    for my 99 4x4 ranger i want some tube bumpers, so far i have only seen dixon and millar bumpers, anyone else making aftermarket stuff for them? i just want to see all my options before i decide which to get. also i want a back tube bumper.


Top