Search results


  1. 2001 hung in 4 low...

    I have a 2001 4.0 four-wheel drive I recently had it in 4 Low and now it won't disengage any thoughts any answers would greatly be appreciated. As always thanks guys I always look forward do y'all's replies this is the best site ever
  2. New ring gear?

    Ok guys im in the middle of a 8.8 rebuild ..bearings races..seals...ive inspected the gears an all appear to be good...but ive seen where alot of ppl go ahead an install a new ring gear at this point...is that always necessary?or will my old ring gear be ok?as always...thanks guys for yalls input
  3. Front diff fluid

    Ok guys..somebody throw me a bone...ive looked over my front diff in my 2001 4wheel drive to check the fluid...and i cant seem to find a place to check it...just a small tube that looks as if a hose should be attached to it on top of it...thanks for yalls help..ive learned so much here.
  4. Transfer case

    I just checked the fluid in the transfer case...i know by the finger test into the hole how to check it are you supposed to add automatic transmission fluid here... or does it cycle through the transmission. Thanks for any input
  5. Pinion bearing.

    Hey guys ive got the 8.8 rear end..and i was wondering if there should be any slack or slop in the pinion shaft when the driveshaft is off...i also have the main keeper nut off to replace the pinion seal an noticed that there is some movement in the pinion shaft...thanks
  6. Condensor needed

    Im lookn for a a.c condensor for 2001 4.0 ranger..as always...thanks guys
  7. Differential leakage behind rear driveshaft yolk

    Yes i have a 2001 ranger wth 8.8 in it an there seems to be leaking just behind the yolk on the rear driveshaft...does anyone know of a link to a article where i could fix this myself as i prefer to do my own maintenence an am learning more about the rangers all the time...this is my 3rd...


Top