• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Search results


  1. RacinNdrummin

    Project El Taco...1990 BII

    Plugging along, not a huge update... Engine is all broke down. Crank was shot.... Leading me to my next step. I started adding up the cost of the parts I was going to use anyway, as well as having the crank reground, and my time into reworking the stock rods, and it would be like $100 more for...
  2. RacinNdrummin

    Project El Taco...1990 BII

    Little update, nothing really substantial. I've decided to take the HO engine I have and build that. It's been hard for me to make time to get to the JY, so I'll make do with what I have until it comes time to get the front accessories, and I'll get the explorer stuff then. After much...
  3. RacinNdrummin

    Project El Taco...1990 BII

    I'd let it go for cheap. Shipping via Fastenal these days is cheap too. That said, it was running kinda crappy the last time I fired it up, I think the ECU might have some moisture damage. I have an MS1 v3.0 with USB I have 80% built that I would throw in for free.... Either way, It can equally...
  4. RacinNdrummin

    Project El Taco...1990 BII

    Back from the Dead. First of all, I really don't post on forums anymore, I really haven't for about 5 years. Part of that is because of my diesel business, and it got hard to put enough time into a thread to make it worthwhile. The other part is the nature of the forum world. That said, this...
  5. RacinNdrummin

    Just another dana 30 sas...

    Yup, theres a lot of ranger 8.8's out there with 3.55's....
  6. RacinNdrummin

    eb question

    Ya... D30's are complete piles... http://www.youtube.com/watch?v=LfJZb7c-DiU Do a YT search and youll see plenty of D30's taking abuse... This is a pointless arguement... Like I said above... D30's are suffcient for most mild RBV builds...
  7. RacinNdrummin

    eb question

    Man you guys are crazy... Im with NMB2 on this one. Thatguy, dude, you looked like a total a**hole to dangerranger. I will step in for him because he doesnt claim to have some sort of built rig, all he was saying was his setup works well, and you decided to rip into it. Its almost like you did...
  8. RacinNdrummin

    Details for the Long Beach meet tomorrow

    Im making a thread so the details of tomorrow can be hashed out, and any questions answered. I propose that we meet at noon, at Cape Disappointment SP in the parking lot just off Jetty Rd after you come into the park...
  9. RacinNdrummin

    JY finds thread...

    So, Ive been thinking, especially after seeing the few JY threads we have here in the NW section, I want to make a thread that people can post JY finds of things they dont plan on picking up themselves. Ive come across things before that are valuable to RBV owners, that I had no intention of...
  10. RacinNdrummin

    j-10 dana 44

    If your gonna spend that kinda money on an axle, dont waste it on a low pinion jeep axle, find a high pinion ford and mod that. If your gonna use the LP axle, run it as is...
  11. RacinNdrummin

    4x4 swap meet...

    Anybody gonna check it out???
  12. RacinNdrummin

    Elbe Hills Snow Run Jan 22... Whos going?

    Ive never been to Elbe hills, but im looking to hit up the 3rd annual snow run the 22nd, and I was wondering if there was anybody from here that was planning to attend??
  13. RacinNdrummin

    Part Throttle Hesitation...

    Ive been having an issue where at about 1600-1800RPM and the middle third of throttle position, Im having a hesitation problem. The first third is fine and if you put your foot into it, it clears up. Also above 2k, there is no problem, even in the middle third. Ive changed the TPS, swapped MAF...
  14. RacinNdrummin

    The Shock Thread

    Ive been doing some research and searching a lot here on the forums, and I think it would be a good idea to have a Shock thread with different shocks, what vehicles they came from, what your setup is, and any other info about them. I think it would help out the DIY'ers. If you have part numbers...
  15. RacinNdrummin

    Another D30 build. Opinions welcome

    The grand cherokee or TJ's D30 is low pinion... Might as well keep the d28 in there... Unless you are swapping in an HP D30, dont bother, your wasting a lot of time
  16. RacinNdrummin

    what d44 hp is it

    Sounds like a 78/79 F250 D44, as they had 3" tubes... However, the F250 didnt have wedges... Beats me...
  17. RacinNdrummin

    The Meridian Auto Wrecking "Pull-N-Pay"

    This is what I posted on Turboford, so I figured Id post it here too... Anybody thats familiar with Meridian Auto wrecking in Graham knows what im talking about and if you are local and dont, heres the scoop: They opened an off-shoot pull-a-part style yard right next door (I assume to capture...
  18. RacinNdrummin

    d44 vs d30?

    Ill dig around in my pictures, I know I have at least one of a blown out gearset, and another chevy front end that I bought for parts had a blown out one as well...
  19. RacinNdrummin

    d44 vs d30?

    No I wasnt implying what you said, your just turning my words around. What I am saying, is the shafts and u-joints on both the D35 and D30 are the weak link... If your blowing out ring gears, your driving wrong, or just flat out have too short of a ratio. And I can personally Vouch for seeing a...
  20. RacinNdrummin

    d44 vs d30?

    First of all, the idea of a .030" in difference in pinion shaft diameter between the HP D35 and HP D30 having less deflection is simply rediculous, especially when you have a big pinion bearing that transfers the load before it even gets to that point. Second, if your an idiot, and are blowing...


Top