• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Search results


  1. RavoHimself

    P1120 tps out of range low

    Well I'm unsure it's fixed all the way. The super irregular idle is gone but it still wants to hold the idle between shifts and it still doesn't always want to idle where it should. It's a lot better but still seems off. I'm gonna give it a couple days an see if it's the the computer trying to...
  2. RavoHimself

    P1120 tps out of range low

    So I brought it to a local shop who I trust. I have the moddbox supercharger kit on there. Turns out there was a cracked hose between the bypass valve and intake. Don't know how I missed that when I sprayed down the entire engine bay but I'll be picking her up later. Thanks for all the suggestions
  3. RavoHimself

    P1120 tps out of range low

    The idle drops right down to 400 or so with the IAC unplugged. I didn't think it was a temp sensor because like you said it's not throwing a code but also because it still does a full warm up circuit. It will start around 2k or just over and then as it warms up drops to 13 or so. So it seems...
  4. RavoHimself

    P1120 tps out of range low

    So 2 nights ago my truck started idling at like 1400 and hangs/jumps to like 2k-2500 between shifts. Got the code so I put in a new bwd tps. Still the same issue. So I replaced the IAC too and that didn't work either. I haven't checked the voltage on the tps yet but I know it's supposed to be...
  5. RavoHimself

    Single stage or 2 stage

    I got a new bed for my truck being that the crossmembers and floor rusted out. Big shocker I know. It's the toreador red metallic and still in pretty good shape. My biggest concern is painting the bed to match and having it look way too new or more glossy than the rest of the truck. I'm going to...
  6. RavoHimself

    Bleach smell coming from engine bay?

    2 days ago after warming my truck up I started noticing a bleach like smell coming out of the engine area. I noticed it got sucked into the cab a little while warming up the truck. Checked my coolant and I was a little low but it's definitely not the typical coolant smell I know if it's that...
  7. RavoHimself

    Awful mystery squeal

    So a few weeks ago my truck started making a quiet squeal when i turned left. It has been progessively getting worse. I noticed my right rear wheel bearing had a lot of play so I pulled the rear end and the right shaft was all messed up. Installed two new bearings and a new passenger shaft but I...
  8. RavoHimself

    B1095 abs code

    Anybody have any experience with this code? Can't seem to find much about about it. What I did find either said faulty wheel speed sensor or the hydraulic abs pump. Either way my abs light is on, brakes work great just no abs
  9. RavoHimself

    bed swap

    my 03 bed is starting to rot out. refresh my memory. any short bed from 93 and up should bolt right up correct?
  10. RavoHimself

    Steering wheel chatter

    Just replaced my front right bearing hub assembly. After I put everything back together the steering wheel chatters when you straighten it out after a turn. Any ideas?
  11. RavoHimself

    abs light

    just had to replace one of my bearing hub assemblys on my 03. put everything back together and the abs light was on. firs thing i checked was the abs sensor. sure enough it must have cracked when i removed it from the old hub because it was exploded. so i put i a new sensor, started it, no...
  12. RavoHimself

    03 fog lights

    so i bought my 03 and it didnt come with fog lights. so i just went ahead and ordered a whole new bumper,valence,brackets and lights. my bumper was starting to rust through the chrome anyway so win win. while i was looking for switched power behind my dash when i installed my boost gauge i...
  13. RavoHimself

    overactive abs

    so i've been having the issue since i bought the truck last year. the typical abs kicks on when coming to a stop. especially if the wheels are turned. but, i noticed last winter if you lock them up the pedal doesnt keep working. you feel the abs kick in and then the pedal is just hard and you...
  14. RavoHimself

    wire colors?

    hey guys. installing a boost guage in my 03. i knew pretty much every wire color and where to find in in my 93 but then new truck is a completely different animal. basically i need keyed power, a ground, and the wire that works with the dimmer switch for the light in the gauge. ground i can...
  15. RavoHimself

    a pillar single gauge pod?

    does anyone have a single gauge pod on their newer ranger? i can find double and tripples no problem but i can't seem to find a single for my 03
  16. RavoHimself

    torsion twist and soft bars?

    So I recently put new keys in my truck to lift it about 1.75". It doesn't ride terrible but I would like it better. My truck has the medium bars and the keys are backed pretty much all the way off even with the lift. Anyone switch to the soft bars with a 4.0L? How do you like the ride. I figure...
  17. RavoHimself

    Ravo's repeat

    After i blew my last rangers motor i couldnt just walk away. (old truck) i had to stay in the family. so i picked myself up an 03 Ranger 4x4 4.0L with a 5 speed. 104k on the motor and really clean. talked them down to 7250 after doing some serious nitpicking on it. exactly the same as my old...
  18. RavoHimself

    new torsion keys

    so i bought myself a 2" lift kit. used our 2 jaw puller to get the factory keys off. put the new keys on but the puller isnt strong enough to put them back into place without bending..... is there another way to put the keys in place without buying that $100 puller? or should i really say just...
  19. RavoHimself

    Which LS to buy?

    hey everybody. so i bought a 03 ranger a few months ago to replace my baby. 210K i figured it was time to get something a little more new. anyway. this truck came with an open dif which i hate. its killing me always having a tire brake loose when i dont need it to. i really like the idea of the...
  20. RavoHimself

    03 No heat?

    alright. so i bought an 03 and the het worked great when i got it. maybe a week ago the heat stopped. if you turn the selector from cold to hot you feel a marginal temp change. but not really. checked the hoses to and from the heater core and they are both hot. pulled the BDA and it rotates i...


Top