• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

thinking about buying some air tools....


rusty ol ranger

Im a Jeep guy now.
Supporting Member
Joined
Sep 22, 2007
Messages
12,261
Reaction score
7,271
Points
113
Location
Michigan
Vehicle Year
1987
Make / Model
Ford
Engine Type
2.9 V6
Engine Size
177 CID
Transmission
Manual
2WD / 4WD
2WD
My credo
A legend to the old man, a hero to the child...
Craftsmen has an online deal right now with a 1/2 in impact, a 3/8 drive air ratchet, an air chisel for 80 bucks.

Heres my question....my air compressor is a older craftsman 6hp/25 gallon.

Will it handle these tools ok?
 


Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
Yes 6hp and 25gal is more than enough. The only tools that really require massive amounts of air are things like paint sprayers and sanders. Even then, the motor will just run more so you may need to give it some cool down time. My shed compressor is 6hp, 33 gallon and 125psi and runs all my tools just as good as my 120 allon 10hp shop compressor.
 

rusty ol ranger

Im a Jeep guy now.
Supporting Member
Joined
Sep 22, 2007
Messages
12,261
Reaction score
7,271
Points
113
Location
Michigan
Vehicle Year
1987
Make / Model
Ford
Engine Type
2.9 V6
Engine Size
177 CID
Transmission
Manual
2WD / 4WD
2WD
My credo
A legend to the old man, a hero to the child...
Yes 6hp and 25gal is more than enough. The only tools that really require massive amounts of air are things like paint sprayers and sanders. Even then, the motor will just run more so you may need to give it some cool down time.
Perfect. Thats what i was hoping to hear. Ive never had air tools before, its gonna be nice not having to do everything with arm power!
 

Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
With the amount of rust you deal with you'll still be reaching for the breaker bar and cheater pipe alot....

:ROFLMAO:
 

G8orFord

Well-Known Member
RBV's on Boost
Joined
Mar 31, 2019
Messages
814
Reaction score
803
Points
93
Location
FL
Vehicle Year
2001
Make / Model
Ford Ranger
Engine Type
4.0 V6
Engine Size
4.0 SOHC S/C
Transmission
Automatic
2WD / 4WD
4WD
Total Lift
0
Total Drop
0
Tire Size
Just the right size to touch the ground.
A lot of it has to do with the cfm. You'll want decent hoses, not just those little dinky spring type hoses a lot of compressors come with.

Also, air tools are great, but the battery powered options nowadays are superior in most cases, IMO. They ain't cheap though.
 

Grumpaw

Well-Known Member
U.S. Military - Veteran
Joined
Mar 20, 2019
Messages
2,189
Reaction score
1,504
Points
113
Location
Virginia
Vehicle Year
2009
Make / Model
Ford Ranger XL
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
Stock
Total Drop
Stock
Tire Size
Stock 225/70/15
My credo
I don't count birthday's anymore...just happy to be looking down at the ground instead of looking up
Saw that set just now. Not a bad price.. The 300 ft lb impact will take care of most stuff you run across unless you get into larger vehicles like taking off one ton lug nuts and really torqued down frame/suspension parts.
Down the line add a cut off tool or a right angle die grinder...invaluable.
Once you start using air tools you will never look back.
One item that the kit doesn't have...
You will need to get a set of impact sockets for that impact tool. Regular sockets won't do...they'll likely crack or shatter.
For what that impact puts out, even Harbor Freight stuff will be OK.
Regular sockets will be OK for the 3/8 inch ratchet tool, but I'd recommend impact sockets for it anyway..
Grumpaw
 
Last edited:

Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
I love my Milwaukee fuel impact gun but here's no replacement for air. Air is always there... batteries need to be charged. Plus as you've said, I spent more on my one battery impact set than I did on my entire compressor and 5 or 6 air tools. It's also about 3 times bigger than an air impact of the same power.
 

rusty ol ranger

Im a Jeep guy now.
Supporting Member
Joined
Sep 22, 2007
Messages
12,261
Reaction score
7,271
Points
113
Location
Michigan
Vehicle Year
1987
Make / Model
Ford
Engine Type
2.9 V6
Engine Size
177 CID
Transmission
Manual
2WD / 4WD
2WD
My credo
A legend to the old man, a hero to the child...
My buddy has one of the fuel battery impacts....its bad ass but im not paying for it lol.

Ive actually got an impact socket set. So im set there.

Im buyin the stuff mostly right now for the air ratchet...i gotta pull the tranny on my quad.
 

ericbphoto

Overlander in development
TRS Event Staff
TRS Forum Moderator
Supporting Member
U.S. Military - Veteran
TRS 20th Anniversary
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Feb 7, 2016
Messages
15,201
Reaction score
16,339
Points
113
Age
59
Location
Wellford, SC
Vehicle Year
1993
Make / Model
Ford Ranger
Engine Type
3.0 V6
Engine Size
3.0L
Transmission
Manual
2WD / 4WD
4WD
Total Lift
6"
Tire Size
35"
My credo
In theory, theory and practice are the same. In practice, they are different.
I second the motion for due grinder and cutoff tool. They will be indispensable once you get them. I find that I don't use my air ratchets as much as I did when I was using them for industrial maintenance. I have a 3/8" butterfly impacto wrench that I really like using.
 

rusty ol ranger

Im a Jeep guy now.
Supporting Member
Joined
Sep 22, 2007
Messages
12,261
Reaction score
7,271
Points
113
Location
Michigan
Vehicle Year
1987
Make / Model
Ford
Engine Type
2.9 V6
Engine Size
177 CID
Transmission
Manual
2WD / 4WD
2WD
My credo
A legend to the old man, a hero to the child...
I second the motion for due grinder and cutoff tool. They will be indispensable once you get them. I find that I don't use my air ratchets as much as I did when I was using them for industrial maintenance. I have a 3/8" butterfly impacto wrench that I really like using.
Oh i fully plan on getting a cutoff. I got a trailer i wanna redo this winter and the cutter will work real well for gettin all the old bolts out that hold the wood floor in.
 

adsm08

Senior Master Grease Monkey
Supporting Member
Article Contributor
Ford Technician
TRS 20th Anniversary
Joined
Sep 20, 2009
Messages
34,623
Reaction score
3,613
Points
113
Location
Dillsburg PA
Vehicle Year
1987
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0
Transmission
Manual
2WD / 4WD
4WD
Tire Size
31X10.50X15
I have a 8hp 60 gallon Kobalt in my shop, it keeps up with things like the impact gun and air ratchets just fine. If I get into body work my little grinders can outrun it after a while, and it doesn't even pretend to keep up with my sander. My 90* angle grinder is pretty small but if I am doing a lot of detail sanding with it, or cleaning an engine for assembly I can get the air lines hot.

If I am really getting into a project my 3/8 air ratchet can out run my dad's 25g Craftsman. I have taken that tank from full to "I gotta stop and let it catch up" before having a single wheel off with my AirCat TH1000.
 

Grumpaw

Well-Known Member
U.S. Military - Veteran
Joined
Mar 20, 2019
Messages
2,189
Reaction score
1,504
Points
113
Location
Virginia
Vehicle Year
2009
Make / Model
Ford Ranger XL
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
Stock
Total Drop
Stock
Tire Size
Stock 225/70/15
My credo
I don't count birthday's anymore...just happy to be looking down at the ground instead of looking up
Rusty, I'm gonna throw this out to you...
If your not familiar with air tools, the set your looking at is basically a light duty "beginners" set. The tools, while Craftsman in name, aren't the best . The impact, at 300 ft lbs, will remove some stuff, but it won't budge a properly torqued 3/4 or one ton truck wheel lug nut. And, its a single speed which means if your not careful you'll strip a bolt/nut very easily. The second you hit the trigger it hits 300 ft lbs. A gun with a variable speed trigger is the way to go. You can hit the trigger and apply the torque slowly...very easy to manage.
I have several, and a 300 lb won't budge the lugs on my E-450 based motor home wheels. Takes at least a gun with 450 ft lbs, and when I travel I carry one rated at 600 ft lbs.
The ratchet is only 45 ft lbs...better ones go up to 60 ft lbs .
If you already have a compressor and hose, and only need a ratchet, go for a better one, and add to your tools as needed.
There is a reason why the impact your looking at comes in an 80 buck kit, while a good quality gun with 450-600 ft lbs can cost hundreds of dollars.
You do get what you pay for. I've got a number of air tools that I paid dearly for over 30 years ago, but I still have em and they still work like new.
If your only going to do some light work, then that kit is a good buy, but for heavy duty with a lot of use, not worth it...you'll be looking for better tools shortly.
Those two tools are going to be the most expensive. Tools like air hammers/chisels, die grinders and cut off tools are relatively inexpensive.
Grumpaw
 
Last edited:

Uncle Gump

Token Old Guy
TRS Event Staff
TRS Forum Moderator
Supporting Member
VAGABOND
TRS Event Participant
Joined
Sep 17, 2018
Messages
13,695
Reaction score
13,149
Points
113
Location
Ottawa IL
Vehicle Year
2006/1986
Make / Model
Ranger/BroncoII
Engine Size
4.0L SOHC/2.9L
2WD / 4WD
4WD
My credo
Lead follow or get out of my way
To get started that air tool kit will do... but I would keep your expectations in line with the purchase price.
 

rusty ol ranger

Im a Jeep guy now.
Supporting Member
Joined
Sep 22, 2007
Messages
12,261
Reaction score
7,271
Points
113
Location
Michigan
Vehicle Year
1987
Make / Model
Ford
Engine Type
2.9 V6
Engine Size
177 CID
Transmission
Manual
2WD / 4WD
2WD
My credo
A legend to the old man, a hero to the child...
Honestly....

Im more after the speed/ease of it then torque.

If it wont bust something loose then i got my trusty old 1/2in drive and 2ft bar lol.

I think for 80% of what i do anymore this will be fine. Plus worse case i always got my map torch on standby.
 

Grumpaw

Well-Known Member
U.S. Military - Veteran
Joined
Mar 20, 2019
Messages
2,189
Reaction score
1,504
Points
113
Location
Virginia
Vehicle Year
2009
Make / Model
Ford Ranger XL
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
Stock
Total Drop
Stock
Tire Size
Stock 225/70/15
My credo
I don't count birthday's anymore...just happy to be looking down at the ground instead of looking up
Understood Rusty...was just throwing some suggestions out. Bought a lot of tools in my 70 years and hate to see anyone get bummed out after buying cheaper tools.
Grumpaw
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top