Seat bolt size?

[Sweet-85']

Anyone know what the factory seat bolt size is for a first gen truck? I misplaced my passenger side seat bolts on the Bronco II when I disassembled the interior. Looks like I'll need to buy some new ones, just need to know what to look for.

Thanks!

 

[85_Ranger4x4]

I think 8mm, flange head.

 

[sgtsandman]

The bolts on the driver’s side should be the same pull one of them to compare and provide a sample.

 

[Sweet-85']

The bolts on the driver’s side should be the same pull one of them to compare and provide a sample

Can't do that, driver seat isn't stock and was jerry-rigged in with new holes and bolts. This was done before I bought the truck...

 

[Sweet-85']

I think 8mm, flange head.

Any idea what something like that would be classified as at Fastenal? I honestly have never had to buy a bolt for a specific application to which I didn't have an original to compare. Fastenal has flange heads, but like 8 million of them, and I'm not exactly sure what to look for.

 

[85_Ranger4x4]

No idea, probably not really critical as long as it has a flange head. Acutal bolt has a captive washer which will confuse fastenal if they are like mine.

I have a spare, I will try to get a pic tonight.

Make sure drivers seat mounts are reinforced somehow on the bottom of the floor so the bolts don't just pull thru if you get in a wreck. Like a large flat washer or something to spread out the force.

 

[Sweet-85']

I have a spare, I will try to get a pic tonight.

Thanks! I wish I knew what I did with the damn originals...

 

[85_Ranger4x4]

From the tip to the washer is about an inch (25mm) long.