well god smiled upon us yesterday, guy hit me back and i drove 40 minutes out to check out the 86, sure enough, they were them. took some pictures for anyone else down the road who may find this, these are the brackets for the dana 35 and 28 crossmember it doesnt matter which one. truck was a 86...
I think I’ve seen what you’re talking about on rock auto for sale for 80’s 2.3 rangers, I also read that the 4x4 2.3’s even after 1990 used a false Dana 35 that was really a 28🧐 for some reason that gives me hope that they’re just metal brackets, guy won’t respond right now but if and when he...
I need the 2.3 engine Mount brackets that bolt to a DANA 35 front crossmember. I got the 2wd ones from a junkyard and they did not fit. I live in NC thanks!!
Alright, whole truck is torn apart and 2.3 is ready to go in, or so I thought. Come to find out unlike the v6 mounts which bolt directly to the frame crossmember the 4 cylinder mounts bolt to a bracket that then bolts to the frame. I didn’t know this before yesterday evening but figured it out...
im putting a carb setup on my 88 long block, the truck is a stock 4.0 setup/fuel pump. i know i need a lower pressure fuel pump, 5-7 psi from what ive read? what kind of pump do yall recommend and what kind of setup do i need for my 2bbl carb?
i have a 1988 ranger 2.3 4 cylinder block + head + accessories, and i want to run as close to the latest model carbed versions of the 2.3 engine (2bbl carb whatever) as possible, i want to use an original ford 2.3 aluminum intake made for a carb. which vehicles have the carbs and intakes i need...
i bought an engine transmission xcase combo on facebook this weekend for $150 which consisted of a 2.3 fully dressed engine, a 4x4 2.3 M5OD, and a BW 13-50. all of which was the original drive train of a 1988 ranger which had EFI, a dizzwop, single plug head, and the wild accessory brackets. im...
i have the James Duff kit that ive had on for a while now (believe its for 4-6in, i have 4in lift) i have mine routed around the coil behind the sway bar, i got them to stay like this by zip tying them to the coil and sway bar for a month or so. Ive had them like this for a while but I dont like...
certain 4.0’s in the junkyard, specifically 1990 and 1991, have a MAP sensor (and the MAF sensor) and a plug for it on the wiring harness. in every picture i see of a 4.0 with the MAP the vacuum line to the sensor is not even hooked up and has a small white piece on it. furthermore, i took the...
i am looking at buying some adjustable camber bushings to correct some issues with my friend end alignment and i found a set of MOG bushings that offers “0-4 degrees of adjustment” does that mean in both directions? - and +? i assume you just rotate it 180 to get the desired camber?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.