• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' the posts that you read.

kimcrwbr1's latest activity


  • kimcrwbr1
    kimcrwbr1 replied to the thread Timing help with the 2.8.
    With the original feedback carb they had the #50 jets and the feedback solenoid controlled the air bleed into the high speed circuit...
  • kimcrwbr1
    kimcrwbr1 replied to the thread Timing help with the 2.8.
    Yes the #50 high speed jets made mine bog down pulling a mountain pass an belch black smoke. Once I put in the #42 jets it give me...
  • kimcrwbr1
    kimcrwbr1 replied to the thread Timing help with the 2.8.
    BTW if your running the autolite 2150 just go ahead and get some #42 high speed jets that will bring that mo fo back to life.
  • kimcrwbr1
    kimcrwbr1 replied to the thread Timing help with the 2.8.
    Are you setting the air mix needles with the vacuum guage. The 2.8 likes a rich idle air mix start the engine after setting the idle air...
  • kimcrwbr1
    kimcrwbr1 replied to the thread Mixture control solenoid.
    If your running on the computer everything has to be correct or it will default into limp mode. It is easy to reset the computer with a...


Top