Recent content by dogboy

Finally got the time to paint the nose, being off work due this whole Corona virus thing. And stuffed a Warn 8274 behind the grill also. Definitely tight, but it fit. Next is going to be rock sliders

I finally got around to posting some pictures. I haven’t gotten anything done to it in a few months really. It still needs sliders before I destroy the rockers, and the nose finished.

That’s a good idea! I’ll do that in the morning.

I can’t figure out on my phone how make images small enough to upload. That’s the only one I had that will work. I’ll work on it.

I haven’t posted on here in a long time, so I figure I might as well share this one. I did a D30 SAS from a WJ grand Cherokee because of the bigger brakes, better steering, and 3” wider than a Cherokee axle. I had heard most people use a Toyota steering box, but I wanted to try to use a Ranger...

Me and my girlfriend want to try and get a little meet going for the weekend on July 11th/12th. Not a wheeling trip or anything. A date, time and place isn't really set yet. But I was thinking maybe meet in Enumclaw head up to lake Tipsoo/Chinook pass, as a possibility. Probably mid morning...

I'm thinking about trying to get another Ranger Zoo Lights meet together in December for the Point Defiance Zoo. I would post on other forums but I've forgot my logins. Would anybody else be interested in going?

I've searched a little, and can't find anything. Has anybody done a 5.0l v8 swap using a 96 Explorer engine harness, but retain the 94 Ranger dash? I'm kind of stuck on my swap, because this 96 Explorer dash and body harness isn't going into my 4.0l 94 Ranger like I thought it would.

I figure I'll start a thread for this truck, instead of having three build threads in one, in my crew can thread. It's a 94 4.0l 5spd 4wd with a 4" lift that I picked up for $500. It started out as an ugly truck, that I was just going to throw a clutch at, clean it up, and sell it. After...

Well, I'm far enough with my build, that I figure I'll post a build thread. I've had a crew cab Ranger dream for a quite a few years now, and creeps back into my mind fairly often. With a few changes to life, I now work 3/4-12's (alternating 3 and 4 days off in a row!!) and no longer have...

I've never seen a picture of both side by side, only dimensions. When I had a friends '96 (I belive) Mustang 4.6, and an old 4.0l in my bed, I tossed the heads back on for a picture. It just shows how wide the 4.6 really is, and how narrow the 4.0l is. I figured maybe it'd be a good picture for...

I've been wanting to do sliders like these on my Ranger for 4 years or more, but my girlfriends truck seemed like a good candidate. I started by cutting the rocker out, and a piece of 2x4 1/8 wall box went in its place. The tube is 1 1/2x.120. I'm pretty sure using the tubes to go back to the...

So, the deal is, is my M5OD in my 93 4wd Ranger (it came out of a 94 4wd Explorer), is going out. Its making bearing noises, grinding in second gear, etc). So, it is going to need a rebuild or new tranny soon. But, I may have a hookup on a M5OD (I would assume its the HD), out of an 04' SOHC...