• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Craig0320's latest activity


  • Craig0320
    Craig0320 replied to the thread Ford ranger 2002 3.0 4x4.
    You really have to be careful ordering from amazon. I ordered two sets for a cherokee and both were terrible. Sent them back and ordered...
  • Craig0320
    https://www.amazon.com/Block-Tester-BT-500-Combustion-Leak/dp/B06VVBSFTF/ref=sr_1_4?dchild=1&keywords=head+gasket+test+kit&qid=1614773680...
  • Craig0320
    Craig0320 replied to the thread NO VOLTAGE TO INJECTORS.
    Glad you got it going.
  • Craig0320
    Craig0320 replied to the thread NO VOLTAGE TO INJECTORS.
    Contact a good remote tuner. They can delete pats and the auto transmission programming out of the pcm and ship it back to you. Should...
  • Craig0320
    Craig0320 replied to the thread pats help.
    Foxbody seats sound like a great solution.
  • Craig0320
    Craig0320 replied to the thread NO VOLTAGE TO INJECTORS.
    Yup. They are a mated pair. The module reads the key and then sends the signal to the pcm with the stored matched signal. If the...
  • Craig0320
    Craig0320 replied to the thread NO VOLTAGE TO INJECTORS.
    You either have a bad wire or blown fuse somewhere. The injectors should have 12volts all the time with key in run position. As Gump...
  • Craig0320
    Craig0320 replied to the thread pats help.
    No problem. Glad I can.
  • Craig0320
    Craig0320 replied to the thread pats help.
    Leave the black/white wire out and put some tape around it.
  • Craig0320
    Craig0320 replied to the thread pats help.
    Remove pin 8 Black/Yellow wire from 10 pin connector and remove the Black/White wire from pin 1 on the 16 pin connector and install the...


Top