4x4junkie's latest activity


  • 4x4junkie
    4x4junkie replied to the thread Adjustable Camber Bushings.
    It's possible the pinch bolt may need to be tightened a bit tighter than usual with these bushings... I've never had mine work loose or...
  • 4x4junkie
    4x4junkie replied to the thread CB Antennea.
    ×2, the Wilson 1000 is a good equivalent, with a bit better power handling capability than the K40 (has a lower loss coil). However it...
  • 4x4junkie
    4x4junkie replied to the thread 99 manuel hub locker?.
    I have heard an occasional comment regarding the locking tabs that hold the lockouts to the wheel hubs not staying together...
  • 4x4junkie
    4x4junkie replied to the thread Adjustable Camber Bushings.
    You need to hold the lower part of the bushing while you turn the upper part (use an extra-thin wrench or pliers or something). Lacking...
  • 4x4junkie
    An occasional clunk (more like *BANG!*) while accelerating indeed is normal, but it happening repeatedly is not. My guess is something...
  • 4x4junkie
    For a 2WD truck, the driveshaft also needs to come from a '98+ Ranger Supercab having the same transmission type (stick or automatic).
  • 4x4junkie
    4x4junkie replied to the thread 4x4 advice.
    Manual locking hubs are available to replace the hubs on PVH systems, though if you're real cheap, you also can just remove the end...
  • 4x4junkie
    ×3 on a little blue Loctite. They tell you to use a new nut because it is self-locking. But if you put something to lock it, then it's...
  • 4x4junkie
    4x4junkie replied to the thread Elon musk......
    How so? Such hydrogen is made with natural gas, not petroleum. :thefinger:
  • 4x4junkie
    4x4junkie replied to the thread Elon musk......
    Absolutely agreed. I understand it takes barely longer to refuel a hydrogen car than it does a gasoline car. With more demand, I could...
  • 4x4junkie
    I always recommend the two-piece fully-adjustable bushings for anyone modifying their suspension such as Moog K80109, or Mevotech...
  • 4x4junkie
    4x4junkie replied to the thread Charging Indicator light.
    That is an odd one... Sounds like it's charging normally (14.6V is a slight tad high unless it's pretty cold outside, but shouldn't...
  • 4x4junkie
    4x4junkie replied to the thread can't find spindles.
    A '96 needs ABS spindles. Though I have to wonder if you could get a non-ABS one to work with a little grinding to make a notch for the...
  • 4x4junkie
    The torsion bars someone else will need to chime in about, but for the axles & hubs, you do need '95-'01 Explorer parts, or parts from a...
  • 4x4junkie
    The pedal is stiff, but will still go down with more effort? Or is the pedal solid and won't go down at all? If the latter, check the...


Top