• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Adverse Affects of Gutting Cats


fastpakr

Forum Staff Member
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
U.S. Military - Veteran
V8 Engine Swap
TRS 20th Anniversary
TRS Event Participant
Joined
Aug 6, 2007
Messages
7,991
Reaction score
2,793
Points
113
Location
Roanoke, VA
Vehicle Year
1999
Make / Model
Ford
Engine Type
V8
Engine Size
5.0
Transmission
Automatic
2WD / 4WD
4WD
Tire Size
285/75-16
Its probably running in open loop permanently due to the sensor delete.

No cats is for carbs. EFI doesn't like it.
EFI really doesn't care that much. It will trigger an alert that the converter isn't running at full efficiency, but that's separate from the upstream sensor's data used for input data to the computer.

Again - I'm 100% not advocating for doing this. Just clarifying that it won't cause running issues.
 


Eddo Rogue

Well-Known Member
Joined
May 18, 2020
Messages
3,952
Reaction score
2,472
Points
113
Location
Burbank,CA
Vehicle Year
1993
Make / Model
Ranger 4x4
Engine Type
4.0 V6
Engine Size
OHV
Transmission
Manual
2WD / 4WD
4WD
Total Lift
skyjacker front leveling kit
Tire Size
31-10.50R15
My credo
Crossed threads are tight threads.
EFI really doesn't care that much. It will trigger an alert that the converter isn't running at full efficiency, but that's separate from the upstream sensor's data used for input data to the computer.

Again - I'm 100% not advocating for doing this. Just clarifying that it won't cause running issues.
Yep, I don't think it would enjoy having to do that though.
Its like picking your nose with a different finger.... easily possible, but not ideal.
 

fastpakr

Forum Staff Member
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
U.S. Military - Veteran
V8 Engine Swap
TRS 20th Anniversary
TRS Event Participant
Joined
Aug 6, 2007
Messages
7,991
Reaction score
2,793
Points
113
Location
Roanoke, VA
Vehicle Year
1999
Make / Model
Ford
Engine Type
V8
Engine Size
5.0
Transmission
Automatic
2WD / 4WD
4WD
Tire Size
285/75-16
Not sure what you're getting at. It literally just triggers an error code leading to a CEL. The computer doesn't care one iota beyond that. The downstream sensor data has no value other than monitoring if the converter is working adequately.
 

ekrampitzjr

Well-Known Member
Joined
May 28, 2021
Messages
754
Reaction score
1,039
Points
93
Location
Virginia
Vehicle Year
2011
Make / Model
Ford Ranger
Engine Type
4.0 V6
Transmission
Automatic
2WD / 4WD
2WD
A honeycomb-type catalyst in good condition should flow freely without significant exhaust restriction. The only OEM catalysts (that I know of) that were known to restrict exhaust flow were the old GM designs with the replaceable pellets. Those did stop up the exhaust unnecessarily, and GM went to the honeycomb design after a few years.

Note that oil fouling from burning oil, excessive temperatures, and physical damage inside can all affect catalyst performance. But that has nothing to do with any faults in most catalyst designs.

In Virginia most of the state does not normally have emissions testing, but during state safety inspection the inspector is supposed to eyeball the emissions system to make sure everything is there. So it's not just California.

I like clean air myself and would not gut a cat. That kind of stuff gives certain do-gooders cause to target the car hobby and those who like do-it-yourself repair and maintenance.
 

superj

Well-Known Member
U.S. Military - Veteran
Joined
Oct 1, 2021
Messages
3,031
Reaction score
2,502
Points
113
Location
corpus christi, texas
Vehicle Year
2004
Make / Model
ranger edge
Engine Type
3.0 V6
Engine Size
3 liters of tire smoking power
Transmission
Manual
2WD / 4WD
2WD
Total Lift
none
Total Drop
none
Tire Size
235s
My credo
Grew up in the 70s, 80s, and 90s
Parts of texas are visual also. My county is
 

Roert42

Well-Known Member
RBV's on Boost
TRS Event Participant
Joined
Apr 24, 2020
Messages
4,739
Reaction score
4,891
Points
113
Location
Kintersville, PA
Vehicle Year
2011
Make / Model
Ranger XLT
Engine Size
4.0 SOHC
Transmission
Automatic
2WD / 4WD
2WD
Pa got rid of the sniffer, but check for any CEL and visual. Any CEL is considered an automatic fail for your emissions sticker.
 

Josh B

Well-Known Member
Supporting Member
TRS 20th Anniversary
Joined
Aug 15, 2019
Messages
3,957
Reaction score
1,959
Points
113
Location
Oklahoma
Vehicle Year
1993
Make / Model
Ford Ranger
Engine Type
4.0 V6
Transmission
Manual
2WD / 4WD
4WD
How do they check the check engine light? That bulb burned out a long time ago, and I never had a bit of luck finding an OBDII reader, or really figure out how to read one with a paper clip. I think I did put something in there above the Cat once
 

alwaysFlOoReD

Forum Staff Member
TRS Forum Moderator
TRS Banner 2012-2015
TRS 20th Anniversary
Joined
Apr 13, 2009
Messages
13,872
Reaction score
5,031
Points
113
Location
Calgary, Canada
Vehicle Year
'91, '80, '06
Make / Model
Ford, GMC,Dodge
Engine Size
4.0,4.0,5.7
Transmission
Manual
2WD / 4WD
4WD
How do they check the check engine light? That bulb burned out a long time ago, and I never had a bit of luck finding an OBDII reader, or really figure out how to read one with a paper clip. I think I did put something in there above the Cat once
When you first turn the key to start a vehicle, the computer turns on all the dash lights so that you can find the burnt out ones. The mechanics look for that. That said, on my 86 ranger, there is no cel light from the factory. And maybe for 87 too, but not sure.
 

Roert42

Well-Known Member
RBV's on Boost
TRS Event Participant
Joined
Apr 24, 2020
Messages
4,739
Reaction score
4,891
Points
113
Location
Kintersville, PA
Vehicle Year
2011
Make / Model
Ranger XLT
Engine Size
4.0 SOHC
Transmission
Automatic
2WD / 4WD
2WD
25 year plus vehicles are exempt from emissions except the gas cap. Has to have a gas cap.

If the CEL doesn’t turn on with key on, that’s a fail. Otherwise they plug into the OBDII to look for an all clear. They plug into a computer that reports back to the state. If they can’t do that, for whatever reason, automatic fail.

If they don’t see an EGR = fail, no cat = fail.

The inspection stations are licensed by the state, but not state run. So mostly they are want to not lose their inspection license by. The state does make it hard for them.
 

19Walt93

Well-Known Member
Ford Technician
V8 Engine Swap
Joined
Nov 13, 2018
Messages
4,475
Reaction score
4,412
Points
113
Location
Canaan,NH
Vehicle Year
1993
Make / Model
Ford Ranger
Engine Type
V8
Engine Size
351
Transmission
Automatic
2WD / 4WD
2WD
Total Drop
3"
Tire Size
235/55R16
My credo
If you don't have time to do it right will you have time to do it over?
NH has OBD II emissions testing because we were threatened with the loss of our federal highway money if we didn't. It applies to 96 and newer vehicles under 8600 gvw. Verifying the MIL function is the first thing the Gordon Darby unit asks for, then it does a scan and any monitors that are incomplete will fail the test. Some foreign cars can have incomplete monitors and still pass for some reason, real cars need to actually pass. I had about a 20-25 minute road test route that I would use to clear customers monitors after repairs so we could inspect the vehicle.
Cats from the 70's were restrictive, modern cats flow much better so gutting one out won't do anything other than make the V6 exhaust note sound obnoxious. Think of your cat as a stainless steel resonator that will never rust out.
 

Broosedamoose

Active Member
Joined
Mar 10, 2012
Messages
362
Reaction score
115
Points
43
Location
South East Massachusettes
Vehicle Year
2007
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0L SOHC
Transmission
Automatic
2WD / 4WD
4WD
Tire Size
31 x 10.5
My credo
Coming in second just makes you the first loser!
One of the adverse effects is getting your post deleted… bottom line is that it’s illegal on ALL street driven vehicles in the US, even if you don’t have emissions testing in your area.
I'm in NO WAY promoting this! I just wanted to know what adverse effects, if any, it would have on the engines performance and if what I was saying was correct. I guess I was wrong. I've heard in the past that it can cause problems with backpressure (which is necessary on some engines, I believe) and other issues such as A/F ratio. However, what I heard must be wrong. That's why I asked the question; to better understand. If I didn't ask, I would still think that what I've heard was true. But now I have the correct information! If I ever have to replace the cats I will either go to the bone yard or get some decent high flow after market cats. Especially since it's not good for the environment which is already screwed up! I hate being wrong but this time I am. When I had the custom exhaust done on my mustang, I watched the guy use a crayon to draw a line down each side all the way to the muffler. He ran the engine until the line melted away in a certain spot and that's where he put the cross-over pipe. He explained how the pulses in the exhaust system work and that where the line melted is where back pulse (revision) from the muffler met the pulse coming from the engine. That's where the pipe got hot first and by putting the cross pipe there it "balanced" the exhaust. He is the one who told me that what people who gut the cats don't realize is that they are causing the exhaust to become unbalanced which causes performance issues. I'm not an exhaust specialist so for all I know he could have been feeding me a bunch of BS! My mustang was carbureted so maybe that made a difference.
 

Broosedamoose

Active Member
Joined
Mar 10, 2012
Messages
362
Reaction score
115
Points
43
Location
South East Massachusettes
Vehicle Year
2007
Make / Model
Ford
Engine Type
4.0 V6
Engine Size
4.0L SOHC
Transmission
Automatic
2WD / 4WD
4WD
Tire Size
31 x 10.5
My credo
Coming in second just makes you the first loser!
Not sure what you're getting at. It literally just triggers an error code leading to a CEL. The computer doesn't care one iota beyond that. The downstream sensor data has no value other than monitoring if the converter is working adequately.
He said he used an adapter that lifts the O2 sensor out of the exhaust stream and tricks the PCM into thinking everything is working. He isn't getting any CEL so it must work. I Googled it and found out what he was talking about. It's just an extension that screws into the bung and then the sensor screws into that, thus lifting the sensor up out of the exhaust stream. I'm not sure how they are even legal to sell! Their sole purpose it to prevent the CEL from coming on. Here in MA they don't check for things like that but I imagine in other states where the actually look for the cats they would see it and fail them.
 

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,055
Reaction score
13,529
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
I'm in NO WAY promoting this! I just wanted to know what adverse effects, if any, it would have on the engines performance and if what I was saying was correct. I guess I was wrong. I've heard in the past that it can cause problems with backpressure (which is necessary on some engines, I believe) and other issues such as A/F ratio. However, what I heard must be wrong. That's why I asked the question; to better understand. If I didn't ask, I would still think that what I've heard was true. But now I have the correct information! If I ever have to replace the cats I will either go to the bone yard or get some decent high flow after market cats. Especially since it's not good for the environment which is already screwed up! I hate being wrong but this time I am. When I had the custom exhaust done on my mustang, I watched the guy use a crayon to draw a line down each side all the way to the muffler. He ran the engine until the line melted away in a certain spot and that's where he put the cross-over pipe. He explained how the pulses in the exhaust system work and that where the line melted is where back pulse (revision) from the muffler met the pulse coming from the engine. That's where the pipe got hot first and by putting the cross pipe there it "balanced" the exhaust. He is the one who told me that what people who gut the cats don't realize is that they are causing the exhaust to become unbalanced which causes performance issues. I'm not an exhaust specialist so for all I know he could have been feeding me a bunch of BS! My mustang was carbureted so maybe that made a difference.
2 things:

1. I was making sure everyone knows that this topic is frowned upon here.

2. It’s reversion, not revision.
 

85_Ranger4x4

Forum Staff Member
TRS Event Staff
TRS Forum Moderator
Article Contributor
V8 Engine Swap
OTOTM Winner
TRS Banner 2010-2011
TRS 20th Anniversary
VAGABOND
TRS Event Participant
Joined
Aug 7, 2007
Messages
32,213
Reaction score
17,527
Points
113
Location
SW Iowa
Vehicle Year
1985
Make / Model
Ford
Engine Type
V8
Engine Size
5.0
Transmission
Manual
When you first turn the key to start a vehicle, the computer turns on all the dash lights so that you can find the burnt out ones. The mechanics look for that. That said, on my 86 ranger, there is no cel light from the factory. And maybe for 87 too, but not sure.
'88 was the first year.
 

Roert42

Well-Known Member
RBV's on Boost
TRS Event Participant
Joined
Apr 24, 2020
Messages
4,739
Reaction score
4,891
Points
113
Location
Kintersville, PA
Vehicle Year
2011
Make / Model
Ranger XLT
Engine Size
4.0 SOHC
Transmission
Automatic
2WD / 4WD
2WD
it can cause problems with backpressure (which is necessary on some engines, I believe)
No engines require exhaust back pressure, this is a myth.
Someone else above mentioned exhaust savaging. witch is all related.
You want to get your exhausts velocity as high as possible, if you make the pipes too big for the amount of exhaust that needs to flow then you are going to start to decrease the exhausts velocity. This is where that myth comes from, you put too big of an exhaust on and you loose your bottom end because you are not flowing enough air to have effective exhaust scavenging.

An exhaust system is only going to have peak effectiveness at a certain RPM range on a given engine.

Then someone says "this engine must need some back pressure to run right."
 

Sponsored Ad


Sponsored Ad

Staff online

Members online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top