Mattyd
New Member
- Joined
- Nov 2, 2013
- Messages
- 20
- Reaction score
- 2
- Points
- 3
- Location
- Providence, RI
- Vehicle Year
- 2004
- Transmission
- Automatic
Selling my project ranger. See the link to the 'build' fourm at the bottom for pics and what has been done so far.
Long story short, when I blew a front CV axle I decided to cut out the front end and replace it with a solid axle.
This is a 2004 Ford Ranger XLT with 80k miles – Just a baby. I am the second owner and have the title and last bill of sale for registration purposes.
What you get:
Dana 44 high pinion axle from a '79 F250 with hi-steer knuckle geared 4.56
Ford 9.75 rear axle from a '04 F150 geared 3.55
Ford 8.8 rear currently attached geared 4.10
GM 12 Bolt geared 4.56
Ballistic Fab 1/4" spring mounts (perches, hangers, shackles)
Ruff Stuff one ton DOM steering linkage and joints
Ford Ranger rear leaf pack with booster spring (front)
Chevy 67" rear leaf pack
Toyota IFS steering box and required steering column adapters / linkage
All of the parts are here, this truck just needs someone with the time, skill, and tools to finish the job.
Text or email work best. Again this is a project vehicle, make me an offer, I'm willing to work with you.
Located in Rhode Island.
Long story short, when I blew a front CV axle I decided to cut out the front end and replace it with a solid axle.
This is a 2004 Ford Ranger XLT with 80k miles – Just a baby. I am the second owner and have the title and last bill of sale for registration purposes.
What you get:
Dana 44 high pinion axle from a '79 F250 with hi-steer knuckle geared 4.56
Ford 9.75 rear axle from a '04 F150 geared 3.55
Ford 8.8 rear currently attached geared 4.10
GM 12 Bolt geared 4.56
Ballistic Fab 1/4" spring mounts (perches, hangers, shackles)
Ruff Stuff one ton DOM steering linkage and joints
Ford Ranger rear leaf pack with booster spring (front)
Chevy 67" rear leaf pack
Toyota IFS steering box and required steering column adapters / linkage
All of the parts are here, this truck just needs someone with the time, skill, and tools to finish the job.
Text or email work best. Again this is a project vehicle, make me an offer, I'm willing to work with you.
Located in Rhode Island.
Dana 44 SAS 2004 Ranger
I'm going to SAS this summer and am starting to get my parts all lined up. Its an around towner and drive to the trail rig and I'm planning on running 35in-37in tires depending on availability and prices. I have a front 79 F250 dana 44 and a chevy ?? rear dana 44. Both axles are 4.56 gearing...
www.therangerstation.com
Last edited: