Replacing the Power Distribution Box Wire?

[Rouphis]

The wire going from the Power Distribution box to the solenoid on my truck is pretty rough. How do I replace it. I pulled the box apart enough to see the back of it, but it looks like its secured with some type of rivet.

Thank You
-Rouphis

 

[modelageek]

The wire going from the Power Distribution box to the solenoid on my truck is pretty rough. How do I replace it. I pulled the box apart enough to see the back of it, but it looks like its secured with some type of rivet.

Thank You
-Rouphis

update your signature/profile so that it has all the info about your truck and location..you can use mine as a template

 

[Rouphis]

update your signature/profile so that it has all the info about your truck and location..you can use mine as a template

While I am thankful for the reply, I was kinda looking for something at least pointing me in a direction, that vaguely hints at sort of addressing my issue..........

 

[modelageek]

While I am thankful for the reply, I was kinda looking for something at least pointing me in a direction, that vaguely hints at sort of addressing my issue..........

I did not have an answer for you, however there are a lot of posting trolls on here and if it looks like you are trying ie. you create a a good sig/profile......then you have a better chance of getting help.......if nothing happens here post in Electrical forum....... you should add mileage, type of cab, tranny and if you have AC to your sig.....

 

[modelageek]

While I am thankful for the reply, I was kinda looking for something at least pointing me in a direction, that vaguely hints at sort of addressing my issue..........

I can take a guess and say you should drill out the rivet and replace the wire using a bolt and lockwasher or something similar or another rivet maybe

 

[modelageek]

maybe you could cut the wire a few inches from the box and then connect the new one to the wire.....it's probably not perfect but maybe better than what you got.....