• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

This 2019 Ford Ranger FX4 has an open front differential


Jim Oaks

Just some guy with a website
Administrator
Founder / Site Owner
Supporting Vendor
Article Contributor
TRS Banner 2010-2011
TRS Banner 2012-2015
TRS 20th Anniversary
VAGABOND
TRS Event Participant
GMRS Radio License
TRS 25th Anniversary
Joined
Aug 2, 2000
Messages
14,993
Age
57
City
Nocona
State - Country
TX - USA
Other
2005 Jaguar XJ8
Vehicle Year
2021
Vehicle
Ford Ranger
Drive
4WD
Engine
2.3 EcoBoost
Transmission
Automatic
Total Lift
3.5-inches
Tire Size
295/70/17
Yes....

This 2019 Ford Ranger has a locking rear differential, but the front differential is open. It's not even a limited slip. It appears the only option for the rear in any Ranger is an open differential, or a locking differential.

My 2010 Ford F-350 FX4 Super Duty had front and rear Trac-Lok (limited slip) differentials, and I really expected the same or more on a 2019 Ranger. My Super Duty felt like it had front and rear lockers when you took it off-road in 4WD.
 
I think rear axle on any 4WD should be limited slip, well any pickup truck really, lol.

Front axle should have the option for limited slip, 95% of buyers would never need L/S on the front if they had L/S on the rear
The 5% that want it can pay for it :)
I wouldn't

I have L/S on the rear and open up front, and never been stuck because of no L/S on the front, been stuck but not because of no L/S on the front, lol
If I wanted to spend the money then I would buy a winch first, not a L/S front differential

Lockers are another story altogether
 
Last edited:
I would rather have a selectable locker in the rear than LS.

LS is great but there are times it just wants to go sideways.
 
I'll take a L/S rear axle all day every day. Selectable locker up front. Or both front/rear selectable lockers.

My L/S rear axle, which I tightened up even more during my rebuild, has never acted unpredictably on me. It's never wanted to go sideways on it's own.
 
I'll take a L/S rear axle all day every day. Selectable locker up front. Or both front/rear selectable lockers.

My L/S rear axle, which I tightened up even more during my rebuild, has never acted unpredictably on me. It's never wanted to go sideways on it's own.

In 2wd that is all my Ranger with a tight limited slip wants to do. With a crown on the road if it is slick out you have to have it in 4wd for directional stability.
 
Not surprised but it should at least be an option.

I have a lock-rite in the front of mine and a very tight limited slip in the rear. It's squirrelly as hell in 4 wheel drive on the road, bad enough that I'd try to avoid using it if at all possible. Selectable lockers for a street driven truck is just a must IMO.
 
I have Torsen LS front and rear and it works very well. There are a couple very minor things I notice about the combination but nothing a little common sense driving doesn't fix. I would really prefer a selectable locker in front with the Torsen in the rear, but a front selectable locker is not available for my Ranger.
 
So far on my 87 V8 2wd swap truck, I'm less than impressed with the Torsen on the street for doing hooligan things. I'd rather have a tightened up L/S in it I think, but I paid a premium for the axle so I'm going to keep it as-is for now. Other than swapping to a more highway-friendly gear.
 
There is always the option of the Auburn Gear ECTED MAX, which is a limited slip when off and a locker when on. I'm considering one for my 2011. L/S is better for on the road and locker for off road.


For the front, a locker is nice but it depends on how you use the truck. Overlanders might have a front locker they use them sparingly since they bind up the works in anything other than pretty much straight line driving and very much discourage their use when going down hill.

Me personally, I would rather have a gear driven limited slip in the front and a locker or locker/limited slip combination in the rear.
 
I would actually prefer a front and rear selectable locker.

An open rear will make sharper turns than a rear where both axles are engaging.

With a truck with limited wheel travel, it would be nice to send power to the wheel that's actually touching the ground.
 
Light pressure on the brake pedal often solves any offroad wheel spin issues with Torsen models of L/S units.
 
Most stock 4x4 trucks are open in front and rear unless optioned with a locker in the rear. Speaking of the new trucks. Raptor not included. In other words, 2 wheel drive. 1 in front and 1 in rear.
 
My FX4 Super Duty was limited slip front and rear. I can see a base model 4x4 being open in the front, but I expect more from a FX4.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top