sting88
New Member
- Joined
- Apr 11, 2009
- Messages
- 17
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 95
- Make / Model
- Ford
- Transmission
- Automatic
My sister in law's BF has a bunch of Chevy trucks in various stages of running condition, and literally half of an old house full of parts. He had a bolt on hitch that almost seems "universal", and with a bunch of measurments, it seems that it will fit my 95 Ranger. Here are my questions:
1. Do I use the same threaded holes that the bumper bracket uses? (this is one of the areas that measured correctly)
2. If not, should I drill and re-bolt the bumper and hitch assembly?
3. Is there such a thing as a universal hitch?
There will be more questions when I get it mounted and start finding stuff to tow, but I have to start somewhere. Thanks.
1. Do I use the same threaded holes that the bumper bracket uses? (this is one of the areas that measured correctly)
2. If not, should I drill and re-bolt the bumper and hitch assembly?
3. Is there such a thing as a universal hitch?
There will be more questions when I get it mounted and start finding stuff to tow, but I have to start somewhere. Thanks.